7mgte, aem 2, dh61 igniter

[isomikkohoo]

Hi,
A little problem. If i change my stock 7MGTE igniter to DH61 igniter (stock coils remains) what settings i have to change at aem ems 2 7mgte basemap and what are the values at them?
I read this guide: http://www.supramania.com/forums/arc.../t-100739.html
But it is for AEM EMS 1 only.

Thank you very much.

 

[Funkycheeze]

I don't have an EMS2, but the setting changes should be similar. AEM tech support will be able to help you out as well.

 

[isomikkohoo]

AEM tech support didn't help me. Just asked why i'm changind the ignitor. I explain that i want to test if different ignitor helps car driving smoothly. But i didn't get any answer there anymore after that.
I connect dh61 as you wrote in instructions, but the car didn't start, i tried to change timing too, but nothing happened. I didn't changed any values from aemtuner software 'cause they are very different than the aempro.

 

[isomikkohoo]

Here is some my aemtuner settings, i can drive the car with stock ignitor, but i think that there is in the settings something wrong.