7M Rebuild *56k* eat sandwich

[7Mboost]

1989 Supra turbo 5 speed. An unknown Turbonectis turbo, unknown built motor parts, some old school greddy intercooler and bov, new greddy tt etc. Here's what I did today.

When I got it:

Up:

And out:

An extended oil pan for bigger sump:

Trust fmic:

Front:

Greddy bov:

mystery tubronectics turbo:

engine bay:

turbo:

Previous owner before last stripped tranny crossmember so they put a nut on the end of the bolts where you have to have someone in the car on one nut and one on the other:

ANDTAILS:

That's where its at more to come!

Jeff

 

[BorHor]

cool.. but why didnt you just edit the other post?

 

[7Mboost]

cool.. but why didnt you just edit the other post?

.......EDIT: I see ha sorry.

 

[7Mboost]

*This is the right thread*

 

[Zach]

error404: 1jz not found

Thread Failure Imminent

 

[suprahero]

This thread will self destruct in four...........three..........two..........RUN!!!!!!

 

[7Mboost]

error404: 1jz not found

Thread Failure Imminent

Not yet, this motors got a lot of mods so I want to try this first, my brothers got an sc w/ 1jz so I have a comparsion.

 

[s383mmber1]

Very nice work!

I wish i had a freakin lift like that for my project!

 

[suprahero]

I wish I had a roof..................:biglaugh:

 

[7Mboost]

Very nice work!

I wish i had a freakin lift like that for my project!

I can't take credit for the mods I bought it like that (from FLAsupra great seller btw) and he and I talked about it and it seems to have had some crankwalk due to the previous owner before last who had to much of a clutch in the car.......As for the lift well....gald my dad's a mechanic who just got a new lift because the 20 y.o. pos before it quit working and almost threw a car off.

 

[redmkiii]

Nice bike in the second pic.

 

[7Mboost]

LMFAO that's our "security" drunken indian that lives in the van next to it, no but seriuosly he's cool and good security.

 

[SupraOfDoom]

BLUE STEEL!!

 

[7Mboost]

BLUE STEEL!!

LMFAO ha they caught me at a bad angle.

 

[7Mboost]

Ready to pull:

Yank dat bit

finally:

Look at where the crank dug into the timing cover and made a pita:

Head:

Mystery turbo setup to rebuild or not?:

more:

More to come it took my dad 3 hours to dig out the crank pulley and crap but we finally got it, today we got the crank out (more pics tomorrow no camera today), its bad and somehow the previous owner before last DID NOT INSTALL THRUST BEARINGS!!!! Anyway I've ordered a crank and ordering gaskets tomorrow this project is scootin faster than I would have thought.

 

[suprahero]

Blue Steel Rules........................:biglaugh:

Are you going 1jz? Did you buy a clip or just the engine if you are going 1jz. The title reads like you are.

 

[7Mboost]

I will eventually put in a 1jz engine set but I want to try a big single 7m first.

IT IS MY USER NAME NO 1JZ SORRY, I would change the title if I could.

 

[pimptrizkit]

right on!

make sure if you decided to change your rod bolts to have the rods re-sized.

 

[7Mboost]

Do they weaken that bad the motor was rebuilt 2500 miles ago, and if I do need to replace them do i get stockers or arp?

 

[tookwik4u89]

That car will clean up nice.....good find!

Stock rods with arp rod bolts, have them shot peened and resized.

Get an accurate measurement on the inducer/exducer of that compressor wheel and i'll tell you what turbo. It looks like an older t-series, t-61, t-66???