680cc injectors ok?

[JB91389]

Hey guys,

mods: Full 3" exhaust, 60-1ct-26, lexus afm, aftermarket intercooler and piping, intake, SAFC, and Greddy ebc.

Question: Will 680cc injectors be too much? or will they be ok.-providing I tune the car. They only have these in stock at the moment i'm my car is getting fixed right now.

 

[suprahooked]

You will be running rich with the lexus afm.

 

[black91turbo]

too much fuel for the setup...^^^ what he said

 

[Dan_Gyoba]

Yes, too rich, though the TCCS should be able to correct for it in learned mode. Still, at WOT you're going to be really REALLY rich. If you have to deal with smog test at idle, that'll probably fail as well, since idle is open loop.

Too much fuel +1

 

[MK3PIMP]

what they all said lol

 

[87targa]

I don't know where you live and what emissions you have. For me, my idle passed and my 15 and 25 mph checked passed. with the safc, you should be able to tune it out. I would recommend a FPR to make tuning easier.

when I had an safc and 750cc injectors, my idle was fine and i had to tune out lots of fuel under boost. I was running rich during cruise (12.4).

just my 2 cents

 

[JB91389]

ok Thanks guys!

 

[juhanis]

550's would work fine for you. they do for me.

 

[rumptis]

Can Anybody Help Me Find THE SOLUTION TO MY Problem With Idle Surge???.
Every Time My Rpm Hits Between 1500 - 2000 My Idle Surges.
I Checked For Vacuum Leaks, I Changed Cam Sensor, Coil Packs, Wires, Spark Plugs....still The Same.
Can Some One Help?????
Thanks.

Your first post you HIGHJACK a thread that has nothing to do with what you are needing help with? trying to get banned?

Advice: Post a new tread if you want any help with is problem.

 

[JB91389]

Can Anybody Help Me Find THE SOLUTION TO MY Problem With Idle Surge???.
Every Time My Rpm Hits Between 1500 - 2000 My Idle Surges.
I Checked For Vacuum Leaks, I Changed Cam Sensor, Coil Packs, Wires, Spark Plugs....still The Same.
Can Some One Help?????
Thanks.

buddy, post somewhere else.

 

[7thousandpiecesMGTE]

Your first post you HIGHJACK a thread that has nothing to do with what you are needing help with? trying to get banned?

Advice: Post a new tread if you want any help with is problem.

Does this make him a thread terrorist? LMAO:biglaugh:

At what point would 680's be good to go to? I'll have a setup that is close to his and i was going to go with 550's, but at what point are 550's not enough???

 

[mhopemk3]

Go here! http://www.rceng.com/technical.aspx

Try to base what your HP goal is.. Buy some RC 680's and I'll trade my RC 550's with you. :naughty:

 

[7thousandpiecesMGTE]

Go here! http://www.rceng.com/technical.aspx

Try to base what your HP goal is.. Buy some RC 680's and I'll trade my RC 550's with you. :naughty:

wow, now thats a deal! :sarcasm:

according to the formula I should be good with 550's. I think I would need to rebuild the motor with forged internals before it could reliably handle the horsepower achieved with 680's, its currently rebuilt with only stock internals.

thanks for the link!

 

[mhopemk3]

Youre welcome. I have been looking at a bigger turbo and just went through all the calculations as to what I will need. Good luck!