440's flowing 405cc's at 40 PSi

[honestabe]

A while back I had my 440's cleaned and tested. The test was done at 40 PSi, and they all flowed 405cc's. Does this sound right?

 

[pimptrizkit]

can you post a sheet?

 

[honestabe]

Here you go.

 

[tissimo]

yea, standard rating is at 45 psi.. take off 10% of the pressure cut 10% flow so 450s flow 400

 

[honestabe]

ok, so they flow perfect then? By my calculations, they should flow about 455cc's at 45 psi then, am I right?

Adam

 

[Slow_Sc3]

oem toyota fuel pressure is 43/44psi not 40psi......

 

[honestabe]

If Matt is right, then my injectors flow perfectly.

 

[Slow_Sc3]

If Matt is right, then my injectors flow perfectly.

Matt is right i just went out and checked my aeromotive FPR sits right around 43/44psi.

and btw im using 440's

 

[drewgo]

yep, that is right... and the 550cc will flow 440 at 40psi.....