What's the best way to get close to 300 HP in a stock GTE without major mods? I've tried searching but terms are too common it said.
300 HP
- Thread starter gtsfirefighter
- Start date
3"Exhaust, 3" DP, Intake, Manual boost controller, IC pipping kit with IC from driftmotion or ebay.
Divorced BIC DP will make you yield 300+ hp.
If you havent changed you HG or ne other maintainance, expect things to blow up.
There is a thread that tell you in chronological order on what to do to reach HP goals, but i cant find it so yea...
Divorced BIC DP will make you yield 300+ hp.
If you havent changed you HG or ne other maintainance, expect things to blow up.
There is a thread that tell you in chronological order on what to do to reach HP goals, but i cant find it so yea...
Turn up the boost! Of course relaibility is another story completely. Focus on getting the car up to the task of power first, then go for the basic upgrades (exhaust, downpipe, intake etc.). 300 is too easy these days.
BIC DDP, 3 inch exhaust, intake, walboro fuel pump, 12-14 PSI.
Obviously a head gasket wouldn't hurt, and i wouldn;t even run it without a wideband at higher than 10 PSI
Obviously a head gasket wouldn't hurt, and i wouldn;t even run it without a wideband at higher than 10 PSI
JB91389 said:
Yea this is the site....
^^ hey, did you change your username ( 87 silver sniper)or is this someone else?
oscolivar1 said:
couldnt have bin said any better just make sure you have good hoses,a good radiator,and a good thermostat just so you don't blow shit up.Also a good idea to get arp head studs a new HG or a hks MHG and a good new oem clutch or go with after market
