3 Problems... Can U guy's help me out...

[carter]

After having the car for a couple months, ups and downs, I almost have the motor back together and ready to run. The couple problems that I have are stated above.

1. Its not the hose thats in the picture there's another one that is hiding underneath the intake runners, i have no clue where it goes. It's not one that is a attached to the intake runner and does straight down.

2. The 3 wires *the coolant sensor, temp sensor and other one* have been pulled out of the connector and I'm not sure which one is which. I was thinkin about soldering them, but like i stated, I'm not sure where they go.

3. In the right top corner of this picture, where the charcoal canster, the thing beside it, which would be on the right, where a hose is support to go... I'm not sure really where it goes, my guess would be to the head, but i'm not sure.

I'd really appricate if you guys could help me out. I get my license back the 12th of this mouth and would really like to have my car running by then.

Carter, J.

 

[fonz87]

closer pics would be helpful of what your talking about ?

 

[SUPERIUM]

#3 goes to the rear of the head by the firewall in the sparkplug valley shown here:

 

[carter]

I dont' have the car at my house to take a picture, ie livin in not the greatest place. I wanna say the line maybe a coolant line... but its rubber and i don't really kno where it goes
Carter, J.

 

[rawmk3]

It comes off the part your talking about, and goes to the back of the head. Its for the heater core. Superium has a good pic of it. Just look. For the wiring of the 3 plugs on the t-stat housing, get a chiltons, or haynes manual and look at the back where the wiring diagram is. It will tell you what color wires go where. Or look up the TSRM online and it may tell you aswell. same as for the line your looking for under the intake. Im not sure if your reffering to the J tube, i believe its called, or the vaccume lines for the EGR and VSV. You would really need some better pics of what you are looking for.

 

[carter]

I'll try and get a couple more pictures and what not here soon... and i'll post the pics and what not...

but thanx for the help so far....

Carter, J.

 

[carter]

I just got back from workin on the car and repairing the knock sensor connectors... And was i was lookin at the hose that has me confused to where it goes... It's connected to 4 vaccum lines that lead to the VSV...

But honestly, I still have no clue where it leads... my clue would be to the other vsv, cuz i have two... one of the car and another in my trunck...

I didn't take the care apart, so i'm putting it back together from where i bought it... which would be the problem... but i can't beat the deal that i got on the car.

So if anyway could help me from here... I'd be very happy, because i get my licenses back here in a couple days and i'll be able to drive it, when i get them back.

Carter, J.

Couple someone post a picture of the 3 wires on the water housing? the coolant and temp sensor?