3 piece spoiler?

[Backlash2032]

Does anyone have a template for drilling mounting holes for the 3 piece spoiler? I tried searching, but didnt come up with anything.

 

[SRZMK3]

just try your best to snug the backs supports up with the body of the car... actually never listen to me cuz i do things in a very risky way but it still looks good in the end... but what i did is i took one of the wing pieces and pounded it into my car until i got a dent for a location piece.. and the same with everything else... and then i lined the side with the trunk edge and made sure the wing piece was snug up with the body because of how its all shaped to hug the car..and then i drilled holes a little smaller than the bullet fittings coated the bullet fitting with black silicone and put double sided tape over the hole and drilled a little hole into the tape.... and then i just mashed it in there and held it until it was dry.... the antenna is a little more tricky but its generally the same... and the main spoiler piece same thing and make sure you drill a big hole for the top mount wiring and a small hole for the bolt.... MAKE SURE EVERYTHING HAS RTV SILICONE AND DOUBLE SIDED TAPE for weather protection and mounting. get some good nuts to hold it down...

like i said... im dangerous

 

[mensrea]

3 piese is the stock one, right ?
I took mine off, still have holes that are filled with sealant. I could take pics for you.

 

[Backlash2032]

Yes, its the stock 3 piece. Pictures wont do me much good. I know the general idea of where they need to go. If you could measure it for me that would be amazing

 

[mensrea]

ok, give me some time, gonna pull car into garage

 

[Backlash2032]

ok, give me some time, gonna pull car into garage

I just need measurements on the side pieces. I got the center piece drilled

 

[mensrea]

Here

 

[mensrea]

this thing won't let me upload all of them.
I can email thu

 

[Backlash2032]

Thank you much!

If you want to, my email is totenhosen7@gmail.com

 

[mensrea]

Emailed the rest of them