2JZGTE Physical dimensions

[suicide kp61]

I have searched the web and cannot find the actual physical dimensions of a 2JZGTE. My 2JZGTE for my KP61 Starlet build isnt in yet(expect a big build thread) and Im trying to do a little firewall clearancing and core support modification to order a custom radiator. I need a few measurements to see what Im dealing with to lighten the load of work when the motor does arrive.

I need to know the length of the engine from bellhousing mating surface to crank pulley

Length of the valve cover

Length from bellhousing mating surface to the center of the motor mount bolt



Thanks again for any help

 

[Nalleywhacker]

I thought about doing a 7m in my starlet. not sure on a 2j but the 7m timing cover to back of valve cover was the same length as rad support to the firewall lol needless to say i decided aginst it lol. but good luck.

 

[mattsplat72]

Would a 1j work I have a complete one sitting on a engine stand I can get those dimensions in about 5 minutes?

 

[steveyblack]

I just pulled my 2jz so I can try to get you those measurements within a few days

 

[suicide kp61]

Thanks for all the offers,yes I will take both 1j and 2j dimensions. As for the valve cover being the same length as the firewall to core support....LOL Looks like I will be definitely clearancing the firewall. Oh well it will just help the weight distribution LOL

 

[Nalleywhacker]

Thanks for all the offers,yes I will take both 1j and 2j dimensions. As for the valve cover being the same length as the firewall to core support....LOL Looks like I will be definitely clearancing the firewall. Oh well it will just help the weight distribution LOL

Yeah. what rear-end you planning to use for yours?

 

[suicide kp61]

Narrowed ford 8.8 with rear disc....Larger than the front LOL I gotta upgrade those jewels first thing.

 

[Nalleywhacker]

Narrowed ford 8.8 with rear disc....Larger than the front LOL I gotta upgrade those jewels first thing.

Lol yeah. iam thinking about sticking the ole 13b in mine.

 

[suicide kp61]

Ok so I called the importer and had them measure a motor they had sitting there. It seems from bellhousing mating surface to crank pulley is about 27 inches. Then from the bellhousing mating surface tot eh center hole of the motor mount is about 13 inches. Can anybody who isnt a busy importer rushing to get me off the phone confirm this LOL