After all the hard work of getting everything swapped over I'm not getting any power to the injectors. To give you the history of what I have going on. I reused my 7mgte auto harness but decided to clean it up by removing all the wires from the loom that wasn't plugged in since I have a manual 5 speed transmission. I don't know if that had anything to do with it or not but the car ran fine before the swap. getting fuel getting spark just not getting any fuel through the injectors. If I spray staring fluid through the throttle body it will stay running (barely) but it will run. Ive checked the fuel injector resistor and main relay both are good. If any one has an idea what I did wrong or what I need to do please let me know I'm open for suggestion. Thanks