Hi all, i just completed mount the 2jz-gte engine in order to replace broken 1jz engine for my car. This problem happen makes me cannot feel the full potential of 2jz-gte engine (stock twin turbo). I put my process in order to make a troubleshooting/idea to this problem easier.
1. turn the key on, check engine light as normal
2. engine crank and start without showing a major problem. start at 1.2k rpm and drop to 650++ rpm (cold engine).
3. when the engine is ready (warming up about 4-5 minutes) all parts not showing any potential problem.
4. start revving slowly from idling rpm to 2.5k rpm the engine still well. everything good as expected.
5. when try to pull a little bit hard revving up to 3000-3500k rpm the exhaust give a laud backfire/firework sound with a black smoke. (smell like unburned fuel).
some try and error method to detect a problem
1. when revving the engine without intercooler, the engine can rev to 4k and higher.
2. with IC increase fuel pressure from 30psi(2bar) to 58psi(4bar) still make that sound.
3. change the spark plug still no success
4. check the vacuum hose leak
5. get the voltage reading at fuel pump (10v) even try with 12v mod (direct to batt) still no success.
Hope you may help me to solve this problem. Thank you in advance.
1. turn the key on, check engine light as normal
2. engine crank and start without showing a major problem. start at 1.2k rpm and drop to 650++ rpm (cold engine).
3. when the engine is ready (warming up about 4-5 minutes) all parts not showing any potential problem.
4. start revving slowly from idling rpm to 2.5k rpm the engine still well. everything good as expected.
5. when try to pull a little bit hard revving up to 3000-3500k rpm the exhaust give a laud backfire/firework sound with a black smoke. (smell like unburned fuel).
some try and error method to detect a problem
1. when revving the engine without intercooler, the engine can rev to 4k and higher.
2. with IC increase fuel pressure from 30psi(2bar) to 58psi(4bar) still make that sound.
3. change the spark plug still no success
4. check the vacuum hose leak
5. get the voltage reading at fuel pump (10v) even try with 12v mod (direct to batt) still no success.
Hope you may help me to solve this problem. Thank you in advance.