2JZ CT-12 on a 7MGTE

[Breth]

Hi!

I wanna put the 2jz ct-12 twins on a 7M. And keep the sequential setup. I create a elektronic system to controll the boost of the valves for the set-up.

Did someone try somthing else before?

Sadly i dont find CT-12 twins from the 2JZ.
BTW: What is the diffrenze between de 1JZ CT-12 and the 2JZ CT-12??

Regards Breth

 

[Evilempire1.3JZ-GTE]

parallel=1jz sequential=2jz usdm steel I beleive, both jdm 1jz 2jz ceramic but there is nothing in common with the head pattern for the exhaust on all 3 engines alot of fab work.

 

[foreverpsycotic]

parallel=1jz sequential=2jz usdm steel I beleive, both jdm 1jz 2jz ceramic but there is nothing in common with the head pattern for the exhaust on all 3 engines alot of fab work.

1jz ct12s are tiny in comparison to the 2jz ct12s, with the JDM ct20s being the largest of the 3 but being crippled by a ceramic impeller.

 

[Breth]

Taht means that theoreticly can bring the CT-20 the moste horsepower, but have a to smal tubrine-wheel??

 

[Jervis Mcstabby]

but have a to smal tubrine-wheel??

Nope, it actually means that the turbo is more finicky and high-maintenance in regards to oil versus the steel USDM CT-12s. In most cases, it will likely be more of a headache to maintain.