240sx short throw shifter

taka21

New Member
Feb 16, 2008
363
0
0
washington dc
RazoE;1835260 said:
I'd rather smell farts straight from the ass of a bum than Tranny or diff fluid....

Poodles;1835208 said:
Looks like it will leak :(

AJ'S 88NA;1835247 said:
Yah and the smell of tranny fluid in the car is ....well you know what it smells like.

i agree the smell would be really bad, but its a non issue no leaks , a little form in place gasket under the shift collar takes care of that, im also using all the stock rubber boots as well so no leaks no extra sound its really quite civil
 

taka21

New Member
Feb 16, 2008
363
0
0
washington dc
k20maniac;1835288 said:
what bushing is it that you ended up using? the one that comes with the 240 shifter?
no that thing is too small
what i ended up using was a polyurethane suspension bushing for an accord and shaved it down to 20mm so it fit in the selector hole
 

taka21

New Member
Feb 16, 2008
363
0
0
washington dc
GC89;1835304 said:
do they make a not so short 240 short shifter :icon_conf
yea if you look at the pics the shifter is actually a rather tall 2 piece design much like our stock shifters, i did the sogi mod to mine rendering it quite the stump
 

taka21

New Member
Feb 16, 2008
363
0
0
washington dc
Warlock1;1843683 said:
Ok so what is needed to do this swap?
an ebay short throw shifter
the stock pivot cup from a 240 trans
4 long screws
1 generic polyurethane bushing (trim down to fit)
and a shift knob of your choice