1uzfe maf sensor alternates!

[Flyhigh1]

I have a 1UZFE that is complete with wiring n stuff but the MAF is missing.. i have a 2jzge maf n friend has a 7m maf lying around. Can these be used instead?.

 

[mattsplat72]

Gonna go out on a limb here and say No.

 

[Flyhigh1]

it is already in limp mode... consuming loads of gas n throwing flames from the exhaust at high revs.

 

[Poodles]

Well, it's not a MAF, it's an AFM (yes there is a difference and it's important)

The 7M-GTE AFM electronics will work, but the housing is smaller than the 1UZ's. If you have the housing, swap electronics.

 

[Rollus]

Same as Poodles' answer: 1uz AFM housing + 7mgte AFM sensor.
And no, 2JZ MAF won't work

Envoyé depuis mon GT-N7100 avec Tapatalk

 

[Flyhigh1]

Ok got the answer. Thanks guys. AFM it is.

 

[ForcedTorque]

2JZ-GE uses the same sensor

 

[SupraPieces]

on a similar note... Are the LS400 and SC400 electronics and housing the same?