1jzgte wiring I.D. help!

[jmvgfd130]

Hey everyone, I ended up buying a 1jz today, it all looked to check out until i got home and noticed a group of wires that were cut. They're the largest cluster of wires that go under the rear of the intake manifold and i'm having trouble of identifying them. Can anyone help?

 

[hvyman]

It's hard to tell from the pic but it could be for the auto trans.

 

[jmvgfd130]

nah its a manual

 

[seoul4korea]

Do you have any better photos by chance? Is the motor in the car?

 

[jmvgfd130]

Idk if this pic is any better but i was just talking to my friend and he told me atleast some should be going to the igniter but i counted 30 individual wires and the igniter is only 12 right?

 

[seoul4korea]

View attachment 65635
Idk if this pic is any better but i was just talking to my friend and he told me atleast some should be going to the igniter but i counted 30 individual wires and the igniter is only 12 right?

Thats what I was afriad of..... Some of those wires might (You'll need the connector for it) as for the others you might have to do some research.

http://store.driftmotion.com/static/i-1jz2jzignitorconn12pin.php
http://store.driftmotion.com/static/i-1jz2jzignitorconn4pin.php

 

[garagefujimoto]

can you make a list of every wire? it needs to look like this

1. yellow with red stripe
2. blue with pink dots

etc

 

[seoul4korea]

can you make a list of every wire? it needs to look like this

1. yellow with red stripe
2. blue with pink dots

etc

This would be your best bet.

 

[hvyman]

Igniter has 12 for the coils and then has like 4 more for power and ground. So it's like 16 wires and usually the noise filter is attached to it as well. So close to 20 wires.

 

[jmvgfd130]

1. Black
2. White with Black stripe--(Red DOTS)
3. Light yellow with Light Green stripe
4. Light Green
5. Red with Green Stripe--(Dark BLUE DOTS)
6. Blue--(RED DOTS)
7. Light Blue with Light Yellow stripe
8. Red with Yellow stripe--(DARK BLUE DOTS)
9. White (RED DOTS)
10. Light Yellow with Black stripe
11. Light Blue with Red stripe--(RED DOTS)
12. Light Yellow with Pink stripe
13. Very Light Green with red stripe--(RED DOTS)
14. Very Light Green--(RED DOTS)
15. Light Yellow
16. White with Black stripe (RED DOTS)
17. Yellow--(RED DOTS)
18. Black with Yellow stripe--(RED DOTS)
19. Yellow with Green stripe
20. Black with Orange stripe (RED DOTS)
21. Brown---(DARK BLUE DOTS)
22. Red with White stripe---(DARK BLUE DOTS)
23. Red with Black stripe---(DARK BLUE DOTS)
24. Red---(DARK BLUE DOTS)
25. Black--(RED DOTS)
26. Black--(RED DOTS)
27. Black with Red stripe
28. Black with Yellow stripe
29. Red with Blue stripe---(DARK BLUE DOTS)
30. Black with Red/Orange stripe--(RED DOTS)

 

[garagefujimoto]

Ok. Let me look at home

 

[525gte]

Is the ignitor their on the harness ? If not that porbly the ingnitor
My harness is hanging on the wall. Ill go look

 

[jmvgfd130]

awesome, thanks alot

 

[jmvgfd130]

nah, it seems like the igniter was just cut off.

 

[525gte]

Yeah.. my hole ingintor plug. Has 3 plugs.. and its only 18 or 20 wires. . But if you tie in the coil wires its about 30.. are the coil wire down the center of the vally. That is if it was cut a little further up

 

[525gte]

nah, it seems like the igniter was just cut off.

Did they send the ingnitor with it ?. Where did you get your motor from ?

 

[jmvgfd130]

Nah, it didn't come with one (mistake not to be done ever again) got it from JDMENGINEZONE it was a long day traveling to jersey, online prices weren't up to date at several JDM places so i settled for what i could get.

 

[jmvgfd130]

Yeah.. my hole ingintor plug. Has 3 plugs.. and its only 18 or 20 wires. . But if you tie in the coil wires its about 30.. are the coil wire down the center of the vally. That is if it was cut a little further up

Do you have pictures of the wires connected?

 

[seoul4korea]

Nah, it didn't come with one (mistake not to be done ever again) got it from JDMENGINEZONE it was a long day traveling to jersey, online prices weren't up to date at several JDM places so i settled for what i could get.

At least I know to stay away from them now lol.

 

[justin.daniels2]

I have a ton of spare connectors including the ignitor clips. I went 1zz coils so they were not used. Get the 1jz swap wiring diagrams, they are even color coordinated with exact descriptions of what each wire is