:1zhelp:
ok please forgive my bad spelling and puntuation.
ok so i bought a 1jzgtte complete for 700 with alot of extra little goodies, but the problem is im a little confused on my wiring. The engine came out of a 1991 Toyota chaser, it has the jzz30 harness well i only have the first two plugs on the ecu
so my question is do i really need the last two or can i do with out? or the other question i have is my harness complete or do i have the wrong ecu? then i got to looking at my transmission that came with my 1jzgte and i noticed that the transmission is not even same and the hole for the starter is even on the wrong side. so i got to looking on line and the 1jzgte and the 7mge share the same automatic transmission just the bell housing bolts seems to be slightly smaller so i was wondering sense im really low on cash can i just bore the holes out on the bell housing to make the bolts for the 1jz fit. or can some one help me find a cheap used r154?
so can some one please point me in the right direction i have always been a honda guy but now i want to build a real car.
ok please forgive my bad spelling and puntuation.
ok so i bought a 1jzgtte complete for 700 with alot of extra little goodies, but the problem is im a little confused on my wiring. The engine came out of a 1991 Toyota chaser, it has the jzz30 harness well i only have the first two plugs on the ecu
so can some one please point me in the right direction i have always been a honda guy but now i want to build a real car.