1jz single turbo swap halp

[malgus270]

I just got back from deployment in July, and picked up a 92 240sx with a 1jz swapped into it. It was still on stock twins when I got it, and I really enjoyed it but wanted more. So with my minimal knowledge of working on vehicles, I went ahead and ordered the 60-1 turbo from driftmotion. Now I have most of it figured out with the exception of the highlighted areas in the picture. I'm pretty sure it's all coolant lines, but what am I supposed to do with them? (I would of done a search but I honestly have no clue what i'm searching for in terms of keywords)



Can someone help me please!?

 

[525gte]

You can block off the water lines that when to the turbos.
And the ones for the heater need hooked up the port on tne valve cover needs to go to thr intake pre turbo

 

[malgus270]

Okay, water lines to the turbo can be blocked off. That leaves 1, 2, 3 on there that I have no clue what to do

 

[525gte]

1 needs to go to the intake pre turbo. its suction for crankcase. and i dont own a supra . but 2 and 3 i think are heater hoses

 

[malgus270]

It's actually in a 240sx, but if they're heater hoses I can just leave them disconnected? Does the coolant run to the heater hose? Was thinking I might able to connect "2" to where "5" is. Thank you for your responses by the way