1jz Pwr steering hose
- Thread starter Prettyazznouka
- Start date
T701jz;944197 said:
How do I rectify that? I have a extra reservoir just swap it out? When I poured the fluid in I noticed a off white color start to back up.
OneJSupra;947013 said:
No Not really.... Most of the fluid leaked out because of the hole and when I disconnected everything. I dont kno how to bleed it. My 1st time doing this
Prettyazznouka;947053 said:
theres several ways to do it, how i do it is use something with suction to suck out the resovoir and then refill it, turn the wheel and repeat until its fresh all around. you can either use a hand pump or even an empty soap bottle with a hose attached to it going into the resovoir.
another way is to plug the small resovoir hose inlet (from cooler), put the rack(to cooler) hose to a bucket and refill it that way never letting the resovoir getting low. IMO siphoning is the easiest method for me when i would bleed the p/s systems
Prettyazznouka;947053 said:
you need to bleed it. there's air in the system causing your fluid to bubble and rise up. not good....
here's the link > http://www.cygnusx1.net/Supra/Library/TSRM/MK3/manual.aspx?S=SR&P=42