1jz circuit opening relay

supra_mk3

New Member
Jan 12, 2007
13
0
0
36
Sweden
Hi anyone know where I should connect circuit opening realy cable that used to be connected into the 7m ECU. My 1jz ECU looks like this and I dont know where to connect it.

p647326_1.jpg


p647326_2.jpg


// Rasmus
 

supra_mk3

New Member
Jan 12, 2007
13
0
0
36
Sweden
tissimo said:
umm... fuel pump control relay?

provide a diagram and it will help determine exactly.

If i connect it to earth the car starts and idels fine but i get code 12 then and the rpm limit is 4000rpm. If i connect it to FPC theres a noise from the engine room, and if i connect it to D1 the car starts for 4 sec like if i dont connect it att all.
 

tissimo

Stock is boring :(
Apr 5, 2005
4,238
0
0
40
Melbourne, FL
supra_mk3 said:
If i connect it to earth the car starts and idels fine but i get code 12 then and the rpm limit is 4000rpm. If i connect it to FPC theres a noise from the engine room, and if i connect it to D1 the car starts for 4 sec like if i dont connect it att all.
yea. you're right, it gets power form main relay, its a ground switch. Not sure how the soarer ecu works..

what do you mean a noise from the engine room? I dont think the code 12 and the open circut is related, it just powers the fuel pump on the mkiii. You could just keep it grounded, but the fuel pump will be on anytime the key is on.
 

tissimo

Stock is boring :(
Apr 5, 2005
4,238
0
0
40
Melbourne, FL
it goes to the ecu.. its a ground switch to turn on the fuel pump when the engine is running. Not sure what its equivilant in your ecu.. Either D1 or FPC I would assume, I cant tell which unless you have a Diagram for your harness.
 

supra_mk3

New Member
Jan 12, 2007
13
0
0
36
Sweden
Hi another thing i get code 12 by just turn the ig sw on? Not start the engine. Like this if i erase the codes and then turn the igsw on then i get code 12??