Ok i have searched and searched does anyone no the part number or what size of the serpentine belt with A/C deletion.
If you have a link post it up.
If you have a link post it up.
1JZ Belt No A/C
- Thread starter zSP3CTERz
- Start date
Take a piece of string, run it around the accessories to the length of the desired pulleys, remember to make it a little shorter than your measurement for the belt tensioner.
Take your length, in millimeters, and add it to the end of the part number.
Your number should be K060xxxx or something to that effect. The last numbers are the length. If you know the people at the parts store, they will allow you to "borrow" (potentially) a couple to try.
Take your length, in millimeters, and add it to the end of the part number.
Your number should be K060xxxx or something to that effect. The last numbers are the length. If you know the people at the parts store, they will allow you to "borrow" (potentially) a couple to try.
damn wish i could remember it, i think its 704 714 something of that nature. But use his technique it will work.
Bigzavs;1517594 said:
oh ok the reason i asked was because i was running no a/c or p/s and that required me to run a ribbed tensioner pulley. so i guess ill have to put the smooth back on.
And just for reference the part number listed above that was posted by BIGZAVS is the same part number as the 2000 Audi W/2.8l