im doing a 1jz swap and im finding it difficult to find a 1jz gte with manual ecu. dose anyone know what i would need if i got a 1jz with auto ecu and i wanted to do a r154 swap.
thanx
thanx
supraboymk3;1485958 said:so i got a 1jz on its way, and it has that hydraulic fan stuff but no fan. Is there a way to get a fan for it or eliminate the hydraulic fan stuff.
thanx
supraboymk3;1484524 said:im doing a 1jz swap and im finding it difficult to find a 1jz gte with manual ecu. dose anyone know what i would need if i got a 1jz with auto ecu and i wanted to do a r154 swap.
thanx
MROsborne;1485534 said:My 7M 86.5 has a turbo engine swap and manual swap and I have no problems with the stock ecu which is a 7MGE ecu, although I do have an apexi safc2 piggyback... I'm not sure if my car had problems with the ecu because I didn't do the swaps the previous owner did.
91T breezen';1486758 said:Yes, you can use the 2JZ water pump and fan set-up. I believe you will need the original fan shroud from the 7M too(?) However, the Hydro-fan that the 1J uses, does a great job!