1jz aftermarket tach

[slideways2004]

i am going to be using an aftermarket tach with my 1jz. it seems the autometer tachs need a $80 tach adapter for it to work with the coil on plug ignitions.

will a defi require any kind of adapters??

http://www.racerwheel.com/defi-01205.html

 

[HIDPLANET]

Defi requires a control unit to operate.

 

[aphxero]

You should look into the apexi decs.

 

[Evilempire1.3JZ-GTE]

This is a better one and should not require anything other then a tach signal.
http://www.importpartspro.com/de80blrata0r.html

 

[slideways2004]

Defi requires a control unit to operate.

i know. i can get the control unit 2 for about $100. and i really like the layout of the tach i posted. easy to read while on track. its also easier to mount. I'm making a custom guage cluster, so this one will fit better.

anybody else have any input.

p.s. apexi decs is badass but i don't need 11k tach

p.ss. the orignal post meant to say ignition, not distributor

 

[Ryan_V]

I have an msd tach adapter I'll let go cheap. I didnt end up needing it.

$35 shipped

 

[slideways2004]

I have an msd tach adapter I'll let go cheap. I didnt end up needing it.

$35 shipped

how hard is it to wire in?? It looks like you have to wire it in to each coil?? I rather just hook up 1 wire to a tach signal and have a better defi guage