1jz aftermarket oil press gauge see pic

[JP85MX73]

is this the right thing to unscrew?

 

[OneJArpus]

yes, but you will need the following adapter 1/4 BPT to 1/4 NPT (block is BPT) and aftermarket sensor will most likely be NPT.

 

[JP85MX73]

great! I already have an adapter from driftmotion. whats standard pressure on the 1j? 40psi~ idle 70~ cold

 

[OneJArpus]

I can't remember but i think 70 cold 35-40 warm 70+ cruise 3k.


I see 80 psi cold, 40 idle and 80+ at 2K (near 120 on stock gauge but not exactly on 120) this is on a 1.5jz swap not sure if it makes a difference

 

[JP85MX73]

Thanks! ill report back when i get it rigged up

 

[Dylan JZ]

I can't remember but i think 70 cold 35-40 warm 70+ cruise 3k.


I see 80 psi cold, 40 idle and 80+ at 2K (near 120 on stock gauge but not exactly on 120) this is on a 1.5jz swap not sure if it makes a difference

what weight oil are you running? those numbers seem awfully high.



I'm around 80psi cold, 40-50psi cruising, and ~20psi at idle.. I have checked and re-checked this in regards to others and have found these to be the proper pressures.

10w-40 1JZ.