1J's On the Dyno, what wire for the tach?

[honestabe]

I'm going on the dyno Wednesday with the BPU 1J and my dyno guy is wanting to know what wire he should be tapping into for the tach signal. Pictures would be highly appreciated.

Adam

 

[lilazni3uoy]

the plug that goes into 1jz ignitor, you open the cover for it there should be a long green wire, you pick up the signal from there

 

[Ds650rida]

is that the same for soarer ignitors? you just splice into the wire with the wire from the tach?

 

[tissimo]

is that the same for soarer ignitors? you just splice into the wire with the wire from the tach?

yes and no.. for the tach in hte cluster, no.. for the tach in the dyno yes

 

[Ds650rida]

oh balls.

 

[honestabe]

the plug that goes into 1jz ignitor, you open the cover for it there should be a long green wire, you pick up the signal from there

Thanks, that's what I thought. Sorta sucks because my ignitor isn't on top of my fender, it's on the side of it.

Adam

 

[viperkillertt]

Yo, Did you dyno? Where are the maps? I wanna see.

 

[honestabe]

Dyno'd. Results sucked due to too much fuel. I have an Aeromotive FPR and Apexi SAFC II waiting to be installed. Here's the link to the results.

http://www.supramania.com/forums/showthread.php?t=60326