1g-gte boost

[wilkoo2]

i have a 91 1g-gte, i have fitted a bleed valve and, iam boosting at 0.8 bar, what can i got up to 1.0 bar???

 

[Godspeed]

what are you asking exactly?

 

[Slow_Sc3]

MBC would be the cheapest and the easiest way to incress the boost.

 

[wilkoo2]

MBC would be the cheapest and the easiest way to incress the boost.

what boost will the 1g-gte engine take>>>??

 

[Slow_Sc3]

that would all depend on your injectors and the limits of the turbo, try raising the boost 1psi at a time and see what happens i wouldnt go over 18psi on pump gas and you might have a fuel cut around 14psi. try the search theres a huge thread on the 1g motor some place.

 

[RHDMK3]

The 1G hits fuel cut at about 14 PSI. My 1G also boost's at about .8 BAR as well. Honestly imo, your pushing your luck going any higher without upgrading your fuel system. There was a product made by Trust/GReddy called the REBIC FC or something like that. It's supposed to bypass fuel cut so that way you can boost at higher levels.

 

[Slow_Sc3]

The 1G hits fuel cut at about 14 PSI. My 1G also boost's at about .8 BAR as well. Honestly imo, your pushing your luck going any higher without upgrading your fuel system. There was a product made by Trust/GReddy called the REBIC FC or something like that. It's supposed to bypass fuel cut so that way you can boost at higher levels.

i had a greddy rebic lc for my 7m motor, you can find them on ebay every now and then, removed speed, fuel and boost cut.