1989 Wiring Diagrams

[viperkillertt]

I am looking for a 1989 wiring diagram, i have a few wires that i am not finding. I have a 1990 and 1988 engine manual, but no 1989. ANyone have pdf's or some sort of scans of the 1989? Let me know, thanks! I basically just need to know the different connections for the engine hardness. Thanks!

 

[tlo86]

I am looking for a 1989 wiring diagram, i have a few wires that i am not finding. I have a 1990 and 1988 engine manual, but no 1989. ANyone have pdf's or some sort of scans of the 1989? Let me know, thanks! I basically just need to know the different connections for the engine hardness. Thanks!

what engines? or is this just for a 7m?

 

[viperkillertt]

i already have the 1jz stuff, it is a 89 turbo auto harness in the car.

 

[viperkillertt]

i still am in need of a 1989 body harness wiring diagram. i have 90 and 88, in need 1989. Anyone have info on the 1989? I amjust connecting my 1jz right now. Thanks!

 

[foreverpsycotic]

unfortunately, toyota went nuts on the 89. some of the wiring is 88 and some is 90. the good thing is the dash harness is almost the same(1 wire off) and the rest isn't bad to figure out. tell us exactly what you need to wire for the swap and ill try and make some diagrams.

 

[viperkillertt]

unfortunately, toyota went nuts on the 89. some of the wiring is 88 and some is 90. the good thing is the dash harness is almost the same(1 wire off) and the rest isn't bad to figure out. tell us exactly what you need to wire for the swap and ill try and make some diagrams.

Well, i just posted what i havent found. It is nearly done. So close, i havent tried to start yet, i think she will start no problem, i am just trying to get abs and cruise and ac stuff connected. It is 1 wire from which harness? 88 or 90? I did find 2 purple wires, each wiring diagram said it went to one thing, i wasnt sure which way it was suppose to go.

 

[foreverpsycotic]

damn, cant help you there. i have no AC, cruise or abs. the 90 has 1 more wire.

 

[viperkillertt]

so, the 89 is basically a 90 minus one wire. Do you know which wire that is?

 

[foreverpsycotic]

its on the m1 pin.

 

[foreverpsycotic]

the only purple connector on the IG1 is for the A/T Indicator D. i didnt use the purple on the M1

 

[viperkillertt]

ok, there is a second purple wire, i dont remember which one we connected. If the diagrams said that they were for an auto, then we didnt connect it, but one of the 2 wires was not shown on any of my wiring diagrams.

 

[AF1JZ]

Scroll down about a third of the way and that should help. It is pretty accurate. You can get the idea though.

http://supras.nl/index.php?option=com_content&task=view&id=38&Itemid=54