Hey,
I am new to this forum thought i would throw up my project.
I am located In Australia and started this project a few motnhs ago.
There is still alot of stuff to do but im getting there.
This is my third a70 supra.
SO this is the new girl
Bod stock manual 7mgte AUS delivered.
Parts bought so far...
2jz-gte bottom end (3.1l)
Block has been Bored, honed, decked to specs with treated block.
Ported oil passages
Titan Billet mains
CP 1mm oversized pistons
Carrillo Hbeam rods
Clevite Bearings
Arp main Studs
SPS Carr Bolts
2jz-gte head
HKS 280 Camfhafts
Farrea dual valve springs
farrea retainers
farrea valve guides
farrea valve locks
farrea seat locators
farrea 1mm oversized valves
Shimless buckets
aggresive port and polish
6Boost manifold, cheers to kyle, split pulse collector with twin gate ports.
Couple of these (38mm MVS) for the manifold
Greddy copy intake plenum 100mm TB
Twin entry Fuel rail with bosch 1600cc injectors
3 core alloy rad + few bits and pieces.
Just gotmy new PS pump, recoed and amped up (140 amp) alternator.
Also have a spare 2j motor if i need parts for the new block.
Few more pics of bits and pieces
7m and gearbox out + towed home to start engine bay prep and subframe change..
Ok so got cracking on this again on the weekend...
As per the pics below...
Have also picked up some new rims for it
A TRD Centered 3.9 Diff
Fibre glass bonnet
A few CF bits i got for it..
I am new to this forum thought i would throw up my project.
I am located In Australia and started this project a few motnhs ago.
There is still alot of stuff to do but im getting there.
This is my third a70 supra.
SO this is the new girl
Bod stock manual 7mgte AUS delivered.
Parts bought so far...
2jz-gte bottom end (3.1l)
Block has been Bored, honed, decked to specs with treated block.
Ported oil passages
Titan Billet mains
CP 1mm oversized pistons
Carrillo Hbeam rods
Clevite Bearings
Arp main Studs
SPS Carr Bolts
2jz-gte head
HKS 280 Camfhafts
Farrea dual valve springs
farrea retainers
farrea valve guides
farrea valve locks
farrea seat locators
farrea 1mm oversized valves
Shimless buckets
aggresive port and polish
6Boost manifold, cheers to kyle, split pulse collector with twin gate ports.
Couple of these (38mm MVS) for the manifold
Greddy copy intake plenum 100mm TB
Twin entry Fuel rail with bosch 1600cc injectors
3 core alloy rad + few bits and pieces.
Just gotmy new PS pump, recoed and amped up (140 amp) alternator.
Also have a spare 2j motor if i need parts for the new block.
Few more pics of bits and pieces
7m and gearbox out + towed home to start engine bay prep and subframe change..
Ok so got cracking on this again on the weekend...
As per the pics below...
Have also picked up some new rims for it
A TRD Centered 3.9 Diff
Fibre glass bonnet
A few CF bits i got for it..
.