17x10.5 will it fit

[shaggyskadude13]

I did a search and couldn't find anything on it (mabye I was looking for the wrong thing).

Will a 17x10.5 fit in the rear with a +27mm offset and what about a 17x9 in the front with a +26mm.

I was hoping not to have to roll the fenders. Im at stock height at the moment but i will be getting coilovers soon.

 

[tissimo]

no


....... (just no was too short so had to add something)

 

[shaggyskadude13]

lol, thanks

 

[tissimo]

woah.. youre in rockledge.. you just resently get your car? what color is it.. I might of seen it around.. I go to MI once in a while on fri/sat night..

 

[shaggyskadude13]

Its white, but I bought it with the blown motor so if you've seen it it wasnt me driving it lol. I bought it from a used car lot on us 1 about 2 months ago. I used to go over to MI with my Prelude but I havent been in awhile.

 

[bowsercake]

You can run those 10.5" mustang rims but they will stick out an inch or so. If you cut and pull the fenders it might fit. If you are stock height you might not have problems.

 

[twinturbozs]

Im running a 19x10.5 (+35) with 285's and my fenders needed to be rolled. The only way to get the +27 to fit, is to run with a narrower tire, such as a 265 or 255.

 

[Syris]

it should fit

 

[tissimo]

Im running a 19x10.5 (+35) with 285's and my fenders needed to be rolled. The only way to get the +27 to fit, is to run with a narrower tire, such as a 265 or 255.

I thought you said yours were +43?

Im running a 19x10.5 (+43) offset, but used a 3mm spacer since going up steep driveways or very very hard compression it slightly rubs my rear coilovers.

 

[Nopaint]

they should fit.

 

[twinturbozs]

I thought you said yours were +43?

Ive changed setups.

 

[shaggyskadude13]

Damn, those look good. Nice Choice.

 

[tissimo]

Ive changed setups.

i hate you.... i'm coming to kill you and steal those wheels :love:

 

[Nopaint]

what size are you running in the front twin turbozs?

 

[twinturbozs]

19x9 (+31) 265/30/19

 

[BorHor]

^ Saw your car yesterday! I love the look!

 

[twinturbozs]

^ Saw your car yesterday! I love the look!

Shoot i didnt realize that was your MKIII there. damn your wheels look tucked.

 

[7Mboost]

Yes you will need to roll your fenders, SupraNick runs an 18x10.5 in the rear with a +22 offset and needed a lot of fender roll and fitment.

 

[daneyan]

so i'm guessing the higher the offset the wider the wheel u can fit without it touching the fender?

 

[Evilempire1.3JZ-GTE]

You also need a good set of coilovers(stiff) to minimize wheel travel then you will rub a lot less or not at all.