14mm fuel rail and I have 7mgte 550cc injectors..

[Fletch124]

Story is, I bought an FFIM for my 2jzge na-t that comes with its own fuel rail that is for 14mm injectors... I looked around and found out my 550cc injectors I pulled from my 7mgte to my 2jzge na-t are 11mm. Any way to get other orings or do i have to buy domestic style 14mm injectors too..?

 

[TurboStreetCar]

7m injectors are different from jz injectors, You need jz injectors if the rail is made for jz injectors.

 

[RacerXJ220]

7m injectors are different from jz injectors, You need jz injectors if the rail is made for jz injectors.

7M injectors fit in the stock 2J-GE rail.

I ran into that problem when I went top feed on my 1J and I wanted to keep the injectors I used on my 7M. A lot of aftermarket rails are made for 14mm injectors but I found one that worked.

You'll need the other injectors with that rail.

 

[Fletch124]

7M injectors fit in the stock 2J-GE rail.

I ran into that problem when I went top feed on my 1J and I wanted to keep the injectors I used on my 7M. A lot of aftermarket rails are made for 14mm injectors but I found one that worked.

You'll need the other injectors with that rail.

Yea I pretty much figured I was going to have to buy new injectors.. Was just hoping I could get around it somehow. ahah.

 

[TurboStreetCar]

7M injectors fit in the stock 2J-GE rail.

I ran into that problem when I went top feed on my 1J and I wanted to keep the injectors I used on my 7M. A lot of aftermarket rails are made for 14mm injectors but I found one that worked.

You'll need the other injectors with that rail.

So the turbo rail is different? Learn something new every day!