12s

[IndigoMKII]

What does it take to make these cars break 12.99? I keep being told over and over that my mods will not break 12.99.

Yes, I plan on running my car at the track but it's roughly 2 hours away and I've got a few more things I want done before I even do a shake down at the track. So the question is, if I can cut a 1.8 on 255 hoosiers, will it break 12s with my mods?

 

[customs]

I think thats possible forsure. Suspenion is going to be the next thing that will hold you back. What are you running for suspension?

 

[IndigoMKII]

I think thats possible forsure. Suspenion is going to be the next thing that will hold you back. What are you running for suspension?

Stock worn out suspension. I've got a set of kyb gr2 waiting to be put on but I'm not replacing those til I get sub frame bushings and control arm bushings. I'll do it all at one shot and put in eibach springs then reset my camber.

 

[hvyman]

Depends on the driver mod. you can get into low 11 with 400hp.

 

[aixgelo78]

your car should definitely hit high 12s with 360whp and some decent traction, ironically soft rear suspension is at times preferred for drag racing.... Its all driver limited after that

 

[GrimJack]

Read the thread: http://www.supramania.com/forums/showthread.php?14479-Your-guide-to-drag-strip-success-w-pics.

 

[Suprapowaz!(2)]

My car went 12.91 on Nitto 555r's with a 2.0 60ft time. I would guesstimate that I'm putting down around 315rwhp. You can definitely hit 12's with those Hoosiers and 360rwhp. Good luck and post results.

San Antonio, Tx elevation - 650ft.
Madison, Va. elevation - 604ft.

I bet you could hit low 12's with the power you're putting down.