Search results

Hey all I drive a 89 Cressida. 7mge w58 3.9lsd. The car use to be auto and I converted it to 5speed. Car has a new OEM clutch. The car is really jerky when changing gears or just letting on and off the gas pedal. And I'm pretty sure it's not my driving as most other manual cars I drive seem...

My pedal adjustments might differ a bit from that because this is a cressida and I had to kind of modify the supra clutch pedal to fit in there. But basically I have the correct amount of freeplay, pedal height is going to be different from supra, but the pedal stroke covers 95% of the clutch...

Clutch kit is new so has a new release bearing. Which adjustments are you talking about AJ'S88NA? The clutch pedal is well adjusted if that's what you're talking about. The car didn't make this noise right after the 5speed swap. It's just started making this noise 1000kms after the 5speed...

Hey all I have a 89 Cressida with a 7MGE that I recently converted to 5speed with a w58. I've put about a 1000kms on the car since the conversion. Now on a cold start when I press the clutch pedal down and hold it and the tranny is in neutral and I start the car I get a sound that almost...

No whining sounds in 4th or 5th gear.

Clutch is brand new. So is pressure plate, pilot bearing, and release bearing. I did not replace the clutch fork I just took it out and cleaned it up and regreased it. I drained and filled the transmission with 80w90 castrol regular gear oil. Um in 5th it's hard to tell since the car is...

Hey all I just converted my 89 cressida to 5speed. I used a w58 out of a supra. Anyways in like first, second, and third when you accelerate theres like this winding sound sort of like the sound a supercharger makes. It's not like loud or anything but it is noticable. It's loudest in first...

I read stock flywheel bolts are one time use. I'm getting ready to do a clutch too. So far I know I need a clutch kit (disc, pressure plate, pilot bearing, release bearing), slave cylinder, and flywheel bolts. And of course get the flywheel resurfaced. And I'm going to do the tranny...

I've been pricing out some clutchs mostly oem remanufactured and new ones. Now I know most of you say the Ebay clutchs are crap. But from what I've been reading all the people that say those are crap are boosted. Are they atleast as good for a stock replacement. Like it's just a 7mge with a...

Hey all I'm in the process of a 5speed swap using a w58 on a 89 cressida with a 7mge. How would I keep my ABS working? I need a speed sensor right? Anyone have one? Also with a 3.9 differential ratio the speedometer is out. So is there a way to correct this without changing the diff? Maybe...

You guys have any part numbers? Or know what car these 4 wire o2 sensors came off of? I have no access to go through a bunch of o2 sensors to see what would fit. Also I do have the flange fitting to get a screw in o2.

Not looking for a wideband o2. Just a 4wire replacement o2 instead of the single wire it uses.

Hey all my 89 Cressida is going to need an oxygen sensor soon exhuast gasses are leaking right through the sensor itself and I keep getting codes 25 and 26 every so often. So I was wandering anyone use any 4 wires oxygen sensors on their 7mge? Where do you wire in the heater circuit so it...

I did search before asking this but it seems that it differs depending on studs/bolts/head gasket/mileage/time. Okay well last year at this same time(December 2007) during my winter holidays I did the head gasket on my 89 Cressida with a 7MGE. I used ARP head bolts, Toyota OEM Headgasket, and...

I don't think it would look good at all. The bumpers on the Cressida would completely kill the look on the Supra. Supras look good the way they are. And that Soapra is super nice, been awhile since I've seen an updated picture of it. Keep the Cressida and turn it into a sleeper.

Hey all I need a picture of what the rear strut mount looks like and how the spring is seated to it. Reason for this is because I am using MA70 rear springs on a MX83 Cressida with supra struts and springs on the cressida strut mount. But the springs differ a little mainly in the way they...

How often do you guys recommend changing when using synthetic oils compared to mineral oils? Right now I have the Ford LSD additive with Castrol 80W90 Hypoc C gear oil (I think it's mineral type oil). And I've had it in there for about 30 000kms now and I just checked the maintenance schedule...

Just to clarify when checking for tranny codes the tsrm says jump terminals Tt and E1 I do that and my o/d light does not flash at all it stays off. So what's going on here? http://www.cygnusx1.net/Supra/Library/TSRM/MK3/manual.aspx?S=AT&P=14 If I jump terminals Te1 and E1 my o/d light and...

No codes. Possible for it to be a sticky solenoid valve for it to happen randomly?

Sorry if I sounded like the know it all type. I've checked my coolant temp sensor for resistance and it's good from cold start up to fully warmed up. I've checked the resistance at the ecu connector and its pretty damn close to the reading at the sensor. So I would say the coolant temperature...