Search results

hey im in colorado also, do you have or know any one that has a base tune for 89 mk3 with 1000cc injectors on E-85, or something close to that? i need it to drive my car to the dyno shop.

kwnate nice build!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

im happy with my ACT 6 puck disk and HD plate, if you dont sit in traffic too much

im sure that the cams are on time because the car ran for about 2 weeks

yea it wants to start but dies. here is a pic as of today

Hi everyone, ok im very puzzled i have checked the wireing at the ecu and at the resistor just like jetjock told me to, It all checked out. i checked the all my plugs at the injectors with an nod light, the light was very dim i could barely see it. i also pulled all of the spark plugs and they...

I tested the injector plugs with an nod light. The light was very very dim but at least there is something there at all of the 6 injectors, right? I then pulled my plugs and they are all fouled, and one has exhaust leaking from the bottom of the procelain. What kind of plugs do you guys use when...

i checked the worse way you can, i assmumed. How fast can you flood the engine with 550cc injectors?

Ok, i checked + and - the ecu pulsed and i had 12v at the 4 wires at the resistor. still no start, any other ways to test?

the connector to the resistor, right?

jetjock, Thanks for that info i will the test in the morning and see what happens.

Jetjock, The + side of the injector circuit is the 3 wires(white, white-blue, white-red )at the plug to the ECU, right? If so, I checked the 3 wires from ecu to the injector plugs. now another...

Jetjock, So what do i do when i have spark at the coils but no injector pulse, all grounds are hooked up (i even have a engine ground kit). I checked the CPS with a ohm meter and it shows change in position when I spin it.

So what do i do when i have spark at the coils but no injector pulse, all grounds are hooked up (i even have a engine ground kit). I checked the CPS with a ohm meter and it shows change in position when I spin it.

but i do have spark, i dont have injector pulse on the pirmary injectors.

those bunch of wires are hooked up. the car ran for about 2 week after i build my engine sence then i only touched the harrness at the ECU and over the cams. after building my engine i couldnt pass the smog test. i tired to run another wire for the O2 due to the 21 error code and she stopped...

i checked all the fuses under the hood and at the driver kick panel, all are good. MDC where are those grounds at ? in the harness?

I didn't check that fuse, because i thought it was only for the ignition switch. But I will certainly do that, and if that's what was wrong with it, then I deserve to be kicked in the head...:icon_conf

my error codes were 21,52. the last thing i did was tried to fix the sheilded wire on the O2 sensor, i ran another sheilded wire from the computer to the O2 sensor and grounded the sheilded part. I tried to fire it up, and it wouldn't start. I took off all the stuff that I did, and it still...

Hi everyone, my 89 5-speed 7mgte wont start. I have spark, and fuel pressure but no injector pluse. I have changed the CPS, injectors resistor and, ECU. I have also checked the wiring from ECU to resistor it all checks out. When the resistor is pluged in, i have resistance in both sides of the...