Search results

okay cool where would i find a lex afm?

how does this stop fuel cut though, does the computer realise it has aftermarket parts? also what brand injecters are good and where should i get them and afm from?

hey guys, well ive done a full rebuild on my 7m when rebuilding ive put a 2mm metal head gasket, arp studs, ct26 57 trim, turbosmart boost controller, full 3 inch exsaust and have just ordered an aftermarker intercooler kit. well i am a bit confused on what to do now, i have been told just to...

was just a ground going onto the intake manifold, tyipical something so simple causes a majour pain haha..

ok will try all those tomorrow as all my batterys are dead and my jump starter is also dead so i will let them charge over night and see how i go tomorrow, thanks for your help

Ok so I just finished putting the motor back in and hooking it all up, first problem when I went to turn it over was it had no oil pressure, I have since fixed that with a new gauge. Now when I go to turn it over it won't start, I have checked for spark and it has a nice spark, rechecked the...

everything else is working so shouldnt be that, but thanks, what type of thread do i need to get for my new gauge? i have looked through the forums but havent found an excact type of thread, i saw that greddy ones fit, is this true? if so im going to buy one tomorrow morning

Yeah might buy another gauge tommorrow and see how I go, could there be a fuse blown? If so which one? I am pretty sure oils making it up to the cams

So close to starting it, have had it off the road for 5 months :( should I buy a plug in oil pressure gauge tommorrow and try that?

Tried that as said before and the oil gauge didn't move, just to be sure it is the single wire that goes onto a black plug right? Grounded it and nothing happened with the gauge

Nope everything is still completely stock only thing I replaced was the filter

Any susgestions as the battery pack is going to go flat if I go for longer lol

How long roughly should it take? Been doing it for about 5 mins without the plugs in and still sits at 0, also I only put in 5L of oil and the tsrm says a dry fill needs 5.1L I only had a 5L bottle would this affect it in anyway, thanks

Ok thanks I will try that right now and let you know how I go, no I didn't grease the pump up so I hope that is all the problem is. I got a little worried cos I was cranking it for ages until the battery went flat then put a battery pack on and kept cranking. Hope this fixes it, thanks :)

Cranking without efi fuse in ---------- Post added at 01:08 AM ---------- Previous post was at 01:05 AM ---------- Also tried grounding the black plug which slides over the oil sensor (pretty sure it's the right one?) and the gauge did not move, pretty sure the gauge worked before I pulled the...

I don't have an aftermarket gauge I ment I normal gauge to hook up to the motor, Is the black connector that slides onto the sender unit the right one? Sorry for stupid questions but the wiring loom confused me lol ---------- Post added at 12:50 AM ---------- Previous post was at 12:48 AM...

Hey guys, just finished putting the 7m in and hooking everything up and I have gone to crank it over to build oil pressure and nothing is coming up on my dash gauge, I don't have a normal Gauge to hook up so I was relying on the dash to tell me, does anyone know where I should start looking...

cool cheers heaps didnt actually think about pulling the fuse, but thats a good idea lol mate said to take the spark plugs out but he has never worked on a 7m before lol. what about first start up do you let it idle for an hour or so or just start driving it?

hey guys have just done my first engine rebuild on my 7mgte and put the motor and trans back in the car i am about to hook everything up and was going to buy all the oil, coolant etc for it before the holidays over new years, i have searched around a bit on here and a bit on the internet on here...

yeah i reakon ill start a build thread and ill put a link on here for ya cheers for the advice :)