Search results

well since i got two tps i plug one in and held it in my hand and as i opened the throttle i twisted the tps and the vavle in the intake that splits the runners open and it reved to redline no problem.. so thats my problem but when i mount the tps up the two ears are not twisting the wheel...

how is the tps supposed to be adjusted??

well i borrowed my buddies air flow meter and throttle postion sensor hooked those u and it want accelrate over 3000 rpm until i unplug the tps

well i did some checking all 7.5a fuse are fine in the car now if u look at the wiring diagram i tested at bith yellow wires at junction box three and they both had 11.5 volts now i choulnt find which on was pin w in the manuel but there is only one gr-g wire which im pretty sure is grey...

wer is the 7.5 fuse located the only one i found is under the hood and is labeld charge and it is ok

i took the gauge cluster out and swapped the bulb from the door ajar warning to the check engine light and the check engine back to the door warning and the door warning still lite up but the check engine didnt so there more problems well i unclamped the hose to the idle air sensor to...

if i was having this problem before i did the head gasket and before my check engine light stop working whouldnt it have been illuminated before??? cause it has never been

how big of a job is it to change bulbs in the dash o and when i first got done with my headgasket and went to fire it up i had no spark no fuel nothing but my check engine light was comeing on on the dash with key on... well i realized my dumb self hook the harness grounds up to the starter...

hello all i am having a big problem with my 7mge first the car is a 1986.5 supra 5 speed... my problem is my car idles kinda ruff but when u give it throttle is accerates to about 3,000 rpms then acts as if u let off the throttle it just shuts off and goes back to idle when i bought this...

mine is na for the moment but i am building a 7mgte for it... which reminds me what all will i need for the conversion??? lol

were whould i find some stock replacement piston but i need them like .010 over im just gonna bore it enough to clean the walls. also if i turned the crank like 10 thousand were chould i get bearing and rods to work??

hello everyone im am matt i recently bought 2 supras a 88 and a 86.5 i sold the 88 but keep the 86.5 which is none turbo 5 speed. i bought a 7mgte shortblck im am going to start building it from scratch but i have no expernce with foregin motors. number 3 bearing was spun a little no to...