Search results

mine is for sale. located in idaho. http://www.idahostreetracing.com/phpBB2/viewtopic.php?p=344593#344593 let me know.

i don't drive it, but ya it is missing. and when i did drive it did hesitate and sputtered at first then when i hit boost it ran a lot better.

k so i have a jdm motor, just put a mhg on it. got it put back together and it ran for a couple of days just fine. then about a week after it got put together, it started running really bad. i believe a few cylinders are out. i have checked spark. and i have 120 for compression on all...

delete

thanks guys, not sure what i am going to do. i need to get my car running reliably first for right now. if i did do anything it would be down the road(probably in a year and a half or so). also what turbos would you guys recommend? can be a direct bolt on or not, just let me know.

just wondering what everyone thinks of them. im not upgrading yet but i am doing some research. so let me know. thanks

no, but i resurfaced the head and cleaned the block

nothing was wrong, just replace the hg with a mhg and arp head studs to be safe and know its back together.

ya, i set all the setting back to stock, but i installed the SAFC on the car before i pulled the head. the car ran fine before.

would that make the car run rough, and im pretty sure all the wires are fine for the SAFC and the ecu.

just got my car put back together and it ran fine for about a day and then started running really bad. all intercooler piping is hooked up, but as the title says, it runs really rough. i have installed a SAFC II and when the car is barely running, the SAFC will read out SAFC, like when you...

Meridian, Idaho---Jeremy

afm is plugged in. all intercooler piping is connected. i have no way to check fuel pressure, but i am getting feul. we thought it was the afm but why would both of our afm's go bad. both cars were running just fine when we took them apart. we'll time both cars today and see if that helps. if...

my friend and i just got our supras put back together and both idle just fine. the problem is when we give it gas the car won't rev. we figure it has to do with the cam angle sensor. also the timing might be a little off, because we haven't had a chance to use a timing light yet. can someone...

k thats what i figured thanks

i took my head to get resurfaced. i wasn't thinking a took out the valve buckets and just put them into a container. can anyone please tell me which buckets go on which side.i know i need to measure them but if there is a difference in the shims could you please tell me. thanks