Search results

Driftmotion has done a lot of swaps right?

Thanks :icon_razz

Hello can i disconnect the vakumlines to stock bov if i dont want to use it?? Ive got a new blitz that i am going to put just before throttle body.. // rasmus

Hi ive got a soarer (jzz30) 1jz in my mkIII. And all wiring are done no codes or anything, but i dont gt any boost and it feels when i drive it. And it smokes a bit when i drive away white-blue smoke, not when the car idles just when i drive off and gives it all. Is it someone that has a picture...

Hi I have connected everything like this but where should i connect: Black/yellow - from old alternator plug?? And Brown - from EB1? Right now my car wont crank it just click from starter? Wiring the M1 plug is mainly for your gauges • Brown – Brown from IK2 (ground for cluster) •...

Does anyone know if I dont connect D1 will i get a code 12 then?

Hi another thing i get code 12 by just turn the ig sw on? Not start the engine. Like this if i erase the codes and then turn the igsw on then i get code 12??

Okej do you know where the cable i marked is going in the 1jz harness?

If i connect it to earth the car starts and idels fine but i get code 12 then and the rpm limit is 4000rpm. If i connect it to FPC theres a noise from the engine room, and if i connect it to D1 the car starts for 4 sec like if i dont connect it att all.

Hi anyone know where I should connect circuit opening realy cable that used to be connected into the 7m ECU. My 1jz ECU looks like this and I dont know where to connect it. // Rasmus

Hi ive got a problem with my 1jz engine.. I have put it in my -88 supra and i have taken the plugs for the wiring from my ma70 and i havent changed anything in the ecu. I dont get any spark? I have one cable i dont know where it should be, measure in ohm i get decision on injector 1 and 4 both...

I dont know what it called in english but you cant start the car with the drive or reverse on the automatic gearbox, so i must rewire something to get the car to start with the manual r154 gearbox..?

Hi i have a question about that switch, i have a auto ecu with manual r154 gearbox, how should i connect nsw and sta to get the car to start? I dont want any clutch switch or anything like that.