Search results

  1. mhopemk3

    Need a photo of a knock Sensor plug.

    Here ya go.. Single wire mine have a round grey plug. This is a new harness for an 89T..
  2. mhopemk3

    Auto Trans Linkage problem

    I had a similar issue before my swap.. I had to replace that grommet on the linkage. The old one was worn and there wasn't enough leverage to push it into 1st..
  3. mhopemk3

    How/Where did you guys mount your Aeromotive FPR?

    Did you get that off ebay?? I think I got the same kit but mine came with all the fittings. I got the FPD removal line as well.. I mounted mine on the fuse block..
  4. mhopemk3

    Power Steering out

    WOW!! No ideas.. I always seem to get the rare issues.. If the power steering pump was shot, would it throw the abs light.. I know a speed sensor would but why would that effect my PS.. :dunno:
  5. mhopemk3

    How about Jacksonville peeps?

    I think you are the only one that I know of with a 1J..
  6. mhopemk3

    Maft pro question

    I am pretty sure it is eliminated. I have ran 14psi on stock ct with no problems..
  7. mhopemk3

    Power Steering out

    My antilock light is on and my power steering is out.. Plenty of fluid and no codes.. Any ideas??
  8. mhopemk3

    Stock Fuel Pressure

    So it's low 20's on vacuum.. HMMM..
  9. mhopemk3

    Spec Stage 3...4 puck or 6 puck?

    I have the ACT HD PP, street disk and it holds 400lbs tq. You can just get the 6 puck later for like $120.. It will hold over 500 tq with the HD PP..
  10. mhopemk3

    Stock Fuel Pressure

    I thought it was the low 30's on vacuum.. Maybe I had to set mine @ that due to the 550's.. :dunno:
  11. mhopemk3

    How about Jacksonville peeps?

    Is Brad going to part out his car?? I will give $500 for the motor without turbo.. :icon_bigg
  12. mhopemk3

    How about Jacksonville peeps?

    Yeah they did to me.. I backed them out a few times to clean the threads but the still seemed a little long.. What HG did you use? Did you spray it?
  13. mhopemk3

    RC Injectors

    I just bought a set about 4 months ago and mine said pl9 550s. Not sure what the difference is....
  14. mhopemk3

    Questions about Pics (identifying engine bay components)

    Don't really need it unless it gets really cold where youre at!! I have mine bypassed as well..
  15. mhopemk3

    How about Jacksonville peeps?

    What do you think of the new sig?? It is from the Tampa meet..
  16. mhopemk3

    Bad news

    Dang.. Sorry to hear that just being down there and all.. Didn't you just swap wheels with Vic?? I hope those made it out.. They look good on there..
  17. mhopemk3

    How about Jacksonville peeps?

    I should be in..
  18. mhopemk3

    brake/battery/rear brake lights flashing

    Sounds like an alt to me.. These symptoms have been covered several times. Keep searching the forum.
  19. mhopemk3

    Official Tampa Supra Meet

    It's the same car.. Those are what he tracked with..
  20. mhopemk3

    Official Tampa Supra Meet

    That's a good Idea..
Top Bottom