Search results

Hey Guys, I am looking to get into amateur drag racing this summer at the local strip and would really like to get some slicks for my stock rims (rears). I am considering either the Nitto 555R 245/50/16 or the BFG G-Force Drag Radials 255/50/16. They are comparable in price with the Nitto's...

I am running an AEM UEGO gauge and would like to use the data logging features so I can monitor and adjust my SAFC II, but I don't know where to start. Supposedly they come with a serial connection (RS 232) to enable data logging. Has anyone done this with their UEGO? Do you have to have some...

Ok, first off I am a little embarrassed to admit that I didn't realize this long ago but I am going to ask anyway. So at SILV this last year (yeah I know this is a lot latter, but I store my car for the winter and am just getting around to stuff), I noticed after looking at others setups that...

Hey I was just wondering if any of you have hooked up the Knock Sensor feature on your SAFC II's or NEO's?? If so is it worth it and did it work? I know Dr. Jonez was skeptical on the actual function or usefulness of it and I wondered if any of you have done it. I just finished installing my...

Any one from Utah going to Vegas next weekend for Supra Invade Las Vegas? I saw a couple of MKIV guys from Utah are going on the SILV website. Haven't seen any fellow MKIII'ers yet. I will be going hope to see ya'll there!

Ok, So I have recently finished getting some stuff fixed and sorted out and up until now I have been running about 7 pounds of boost. I almost never boost much past 4500 rpms and usually never go all the way to WOT and I guess this is why the problem has never been apparent. So I turned my AEM...

Does anyone know of way to test the fuel pressure regulator without a fuel pressure gauge? I am having trouble finding one at my local auto stores with a banjo fitting. Is there a way to test it in or out of the car. Because I think that why my car wont start.

:1zhelp: So I am doing a 1986.5 7mge swap into a 87 Turbo Shell and I got everything all installed and ready to start and the car cranks but will not start. Things I have checked and/or tried per TSRM: 1. Checked for spark (+) 2. Checked timing (+ everything was aligned properly) 4. Checked...

Hey I just had a quick question for those who know a lot more about bolt sizes than I do! I am looking for Toyota Part number 91611-60825 (intake manifold bolt) and Toyota Part Number 47721D (rear brake caliper bolt) Toyota gives the sizes as 8-1.25PX65-15 for the caliper bolt and I can't...

Yeah I am currently putting a 7mge (engine isnt installed yet) into a 87 Turbo shell and was wondering if the throttle cable will work from a turbo car (appears to be 18 inches or so) and mate up to the throttle linkage on the 7mge or if it will be too short? Thanks!!

Hey I just found out my coil pack harness (lead in between the engine harness and the coil packs) was all cracked and brittle... So I decided to repair it with some heat shrink and solder. Well I took pictures of all the wires so I could put them in their correct places, and unfortunately I...

Hey all you Utah guys! Do any of you know of a good dyno/tune shop in Utah, near SLC if possible? Thanks

Ok, I have already posted some info about this ongoing problem of mine. For more info on what the history is here's the original post http://www.supramania.com/forums/showthread.php?t=68682 So to summarize, my tail lights/park lights/interior lights haven't been working, due to the fact when...

Hey guys, I just have a quick question. I am doing my KS re-wire tomorrow and I got confused by some of the research I have been doing on the forum when compared to the info found on supra.com. Do you need to ground the thin-net cable in both the engine by and by the ecu (on both ends) or just...

Hey I am using a AEM UEGO sensor coupled with 550's, lex afm, and aeromotive afpr. So lately no matter what I set my fuel pressure at, usually at like 38 with the vac connected (to high) my AEM gauge reads (---) at idle and then under acceleration it seems to bounce around alot ranging from 10...

Hey guys so I was recently doing Shaeff's 12V mod (with no sucess by the way, keeps blowing my efi fuse everytime I crank it over, not sure why??) and after giving up I returned everthing to normal and went to drive my car, and when I turned on my headlights the taillights and interior lights...

So I tested my Wastegate Actuator and its bad, 80psi of pressure and still wouldnt open. So, my question is this. I have an actuator off my original turbo (running a upgraded ct-26 now) and I was wondering if I could use this to replace my bad one, it seems to open around 12 psi. Do I need a...

Hey guys, I am looking to pick up a FCD and was wondering what the big difference was between the HKS K-type and standard. From what I have research the K-Type uses an rpm signal to regulate the fuel cut, where as the standard you adjust yourself. Some say that the standard doesnt work and to...

Hey guys, I have another question, sorry I know I have been plaguing the forum lately, just trying to get all the kinks worked out before spring hits. My wastegate doesnt seem to open anymore and the my ecu throws the code for wastegate malfunction, which I back up on my boost gauge hitting like...

Hey guys, So I finally got my fuel issue sorted out, bad connection by my connector going into the fuel tank, and thanks alot to all those who helped me trouble shoot it!! SO... My next question is... I did the 12 V fuel mod and got all the wire hooked up and the relay all set up but I couldnt...