Search results

Basically I want to use MSD DIS-4 ignition boxes, but I'm not sure if it will work. I was going to use just one DIS-4 box, but I might end up using two. Here's the part that I want to know, will it work using the Stinger with the 1JZ adapter harness? Do I just wire it up normally...

I've got a good R-154, but it's from a soarer. Is it possible to swap it out with parts with a Supra R-154 and essentially swap the transmissions? Since someone stole my other R-154, I'm having to resort to other means here... Any help is appreciated. Thanks. Jeff

I was building up a 1J around my turbo kit and thought about this... The 1J and 2J cranks are the same, why not use a 2JZ stroker kit (pistons included) on a 1J with custom rods? I'm looking at the Titan Poorboy 3.2L kit for the 2J. EDIT: The things I think about when I'm on vacation....

I need a truck to haul my Supra around in. Not really sure what would be the best choice. Suprahero, you're thinking one of two things: 1. He'll never make HP look as good as me, his car is red. 2. WTF? 3. I'll go tow your Supra with my 1JZ powered Supra. 4. After I degree my...

http://www.youtube.com/watch?v=MzBJCjlKbdI Yeah, it's like, eight months old, but whatever ;) If they made one for the Supras, I'd be all over that like a fat kid with cake. To me its magic. I imagined it was a 1.5JZ ;)

Anyone have any information on JZ shim underbucket caps? Part number for any interchangable pieces? I've searched over on SF and here with only 7M information. Thank you. Jeff

I'm confusing myself, I need to know in percentage how much larger 800cc injectors are to 380cc injectors. I just want to make sure it's right before I plug the number in. My guess was 110%? Just making sure I did it right. Thanks all! Jeff

Since I am going standalone with a 2JZ-GE block, and 1JZ-GTE head, I had to find a way to mount a trigger wheel onto the crank. Wow is all I can say. The machinist said he can make the adapter to hold ANY trigger wheel. This is made for the Fluidampr pulley PN: 850802 The...

What goes here? The motor I got didn't have anything there. Doesn't look that important, but I'd still like to know. Thanks. Jeff

Well, here's the 2JZ-GE head on the 1JZ-GTE block. I figured I had the two pieces why not make a motor with it? The 1JZ head is going on the GE block. We used ARP head Studs, and the bottom end is stock. My more recent post on Page 2 talks about the issue we're having finishing this. You...

what is the max RPM for these? I would guess they support 9,000 rpms stock? This also includes the spark quality with a good coil, etc... Yeah, this is just a question about the distributor. I searched and found nothing. Is there anyone who's gone turbo, or makes high HP who cranks...

Yes, it's a car show and etc. Sorry for the short notice, but damn I was busy doing other stuff. You guys should know!

Kod Rnock....... My built 7M didn't last but maybe 8K miles. I have put my 83 project on hold, and dropping the 1JZ into my 87. I'm SO dissapointed for the last time.

I know it's supposed to get hot and all, but my performance has been acting up a lot lately due to either timing or spark plugs. I recently tried the Autolite Irridiums, or Autolite XP5503's. I am thinking it's too hot a plug to run. Anyway I have some colder NGK's here I'm going to...

I checked my timing today, and wow was it off. I set it so the timing light, with the T and E1 connected say 10 on the crank wheel. Now I get the idle and vacuum I want. But under WOT at 12PSI the motor is loud, and exhaust is louder than before, and my EGT's climb faster than normal. But...

I visited their website. Not too bad. So I ordered an Aluminum driveshaft from them, and I paid them with paypal last Sunday, er I ordered it on 24 September 2006. I paid $47 for 2nd day Air shipping. Today is the 30th, and I still have no driveshaft. I need it. Jawsgear's phone number...

The stock driveshaft started vibrating and making we'rd noises in the whole motor/transmission. So I ordered an aluminum one. I've ALWAYS wanted one....... But Ou$h! It started making noises with this new turbo I have partially tuned in. It started to add a lot of drag on the car...

Took the car to the track and made a tuning pass. If i set the boost to 20 PSI, I get blowby and my AEM WB goes to 10.0 through the entire 3rd gear pull. Then I feel a loss of power and see smoke behind me. Okay been here done this. I take it to the parking area and inspect the car...

So I finally took my built motor to the track, and just one and only pass made I ran a 14.2@ 107mph. This was on about 17 PSI on my new turbo. My 60ft. was 2.4, and I did not launch hard out of the hole at all. This turbo is barely alive at 17PSI. My MAFT is acting up all the time, and I...

10 September 2006, me and my friends are going to the 1/4 mile track at Steele, AL. If there are any takers, PM me. Jeff