Search results

Guys,I am going to dyno my new (single turbo) setup soon... I am running a GT72 DBB turbo 0.70 A/R (PHR Stage 3) on a stock motor with only 264 HKS cams and BC springs & retainers. Also have some Greddy cam and underdrive pulleys along with an ATI crank pulley. Fuel system up to four digit...

My tuner is trying to tune my single turbo with AEM... With boost target set at 15 psi and base fuel pressure set at 37-38 psi on the aeromotive FPR When we reach max boost at 15-16 psi the fuel pressure goes only at 45 psi,and the A/F gets leaner. Tuner says it should be at 52-53 psi when...

Aristo JDM 2jzgte into an 87' mk3. Everything works great. Only the tacho is not working...what the f@@k? It's my 2nd 2jz swap into a mk3 supra. From the E10 plug (2jz ecu) pin 16 I get the TACHO signal and send it into mk3 plug M1 pin 4 which is a 'B' (black) wire that goes to the...

I am very very disapointed. Today I installed the M600 motec but I can't connect the lap top to the motec. It reads 'connection error'... I use a CAN cable (part number of motec CAN cable 61021) to parallel port. WHAT ON EARTH is wrong and I can not connect?????????????????? I have to get...

Just installed the 264 HKS cams. With BC springs and retainers. Also some Greddy cam gears with Greddy pulleys. I had the car in the shop for 14 days and the battery died... I first started the car some hours ago and I had high idling 1.400 rpm for 3 minutes and after it's warm up session it...

Just got some new ferrea valve stem seals but I got all 24 of them in one small nylon bag... I heard there are 12 intake and 12 exhaust valve stem seals. How can I find which ones are for the int / exh ??? If you want me to post up a picture,please let me know.. Thanks!

I was driving my car for 4 months with a blown 2nd turbo on my twins:cry: I was gathering all the necessary parts and all the 'I wanna have' performance parts.:biglaugh: As some people know I was running my 2jz mk3 BPU'd for about 2 years. Here's a picture of my engine bay with the stock...

Hi guys! I blew my twins some time ago,and I just installed a GT72mm turbo... I've ordered my fuel kit.I should have it in 2 weeks.Then I'll go EMS. For now I'm on stock ecu (jdm MAP) & fuel (440cc). I have a JDM 2jz mk3 supra:biglaugh: I drive my car but I never go past 1-2 psi of...

I am building my own fuel system. I am going big single soon :naughty: I will run 2 intank fuel pumps.The pumps will feed 1 single line to a "Y" block seperator near the firewall.After the 2 feed lines will go to the dual feed fuel rail,which will be two -6AN feed lines. My question is the...

I got new parts for my fuel system: # Sard top feed fuel rail # Sard 800cc high impedance injectors (got a jdm 2jz with no resistor pack) # twin GS341 255lt/h HP Walbro pumps Fuel lines : ---------------------------------------------------------- # Custom fuel tank hanger with one...

I just bought a used MoTec M600 standalone ecu. It was on my friend's mk4 GT74 DBB single turbo. The tuning was made by OWEN Developments in England. I am going to put it on my car ....mk3 2jzgte with only 2-3 slightly differences. I have HKS 264 cams ...his has BC 272 I have a 72mm...

Any comments on that kit from that company??? Has anyone put them on? Any suggestions? Have a chance to buy one kit (6pot/355mm) for 1500 $....:sarcasm: p.s. IJ you have a pm

Bought the car in 2001 from Germany and it was my first car with my name in the registration...and still is. Never saw one before with my eyes (supras are very rare in Europe),not to mention in Greece where I live you could only see it on magazines :biglaugh: Didn't know much about this...

Yeah...in Europe they're doing some high speeding on a controlled runway. A guy filmed a mk3 doing almost 320 km/h.:love: From what I saw,the car is a black 89+, euro spec with 18' or 19' wheels! Who said mk3s are not capable for 200+ mph speedruns... Not bad for a 20year old car...

Ι am looking to buy this turbo.......tell me what you think? GT45 T4 TURBOCHARGER TURBO CHARGER T66 SPEC 4.0" Outlet T4 GT45 Y2004K Turbo DETAILS: Nomenclature (tag ID) T4 GT45 Y2004K Inlet (exducer/hot side) T-4 Flange 70.1mm x 82.55mm (2.76" x3.25") Outlet (exducer/hot...

I am at almost full BPU mode with my 2jz-gte with stock twins. Got some new 264 HKS cams. :biglaugh: Now I am going to put them on :sarcasm: BUT.....will I need cam gears to set the proper timing or a standalone ecu? Heard that without a standalone I will never idle correctly :aigo...

Hi guys....I am curious about this : Who runs this turbo / turbo kit ? Which is the max. whp achieved with it? And does Driftmotion makes a turbo kit for 2jz? (cause they have exhaust manifolds,DP kits,fuel rails,parts for 2jz) ...or does the 1jz kit fits the 2jz motor /

I am planning on getting a V160 6speed getrag trans. But first I will lower my rear gear.Stock my car has the 3.73 LSD. I heard that we can get a 3.540 rear ring & pinion that fit into the 8 inch rear pampkin,from Jawsgear.But still I want something closer to 3.1 / 3.2 that the V160 has...

Which do you think are the peak warnings of the: Exhaust temps,Water temp,Oil temps...? I say...Exhaust: 1600-1700 F Water : 220-230 F Oil : 250-260 F Post your knowlegment and facts that you have seen while driving supras! Which are the highest temps you've...

I've just installed an A/O oil cooler and oil filter relocation kit. I put the oil cooler after the IC,between the IC and the condenser cooler. I do see a 5-6 degrees Celcious drop in oil temps during normal cruising, (haven't raced the car yet) but I do see about 5-6 degrees Celcious...