Search results

  1. Moy

    How much would speedo be off by?

    I've searched, and found a thread with a post saying that a member had a N/A differential (4.30) with an 87-88 turbo 5spd driven gear (for 3.91) and that it was 11mph off at 65mph. What I need to know is: how far off, percentage wise, would my speedometer be off by, if I kept my 4.30...
  2. Moy

    "Knock, knock! Who's there? You're motor b**ch!"

    (I apologize for poor picture quality) I fried something big time
  3. Moy

    WTB: R154 Speedo Driven Gear (IL/WI)

    I need a R154 speedometer driven gear (located between the transmission housing and lower speedometer cable). MUST BE FOR 87-88 TRANSMISSIONS WITH A 3.91 LSD!!! Let me know what you've got! Prefer seller to be located between Chicago, IL and Milwaukee, WI for local pick up (if...
  4. Moy

    Need Toyota Part Numbers Identified

    As bad as this may sound, I cannot for the life of me figure out which bolts go where. I made an order with Elmhurst Toyota for: Trans mount to support member Trans support member to body Engine mounting plates to body Driveshaft carrier to body Differential housing to subframe...
  5. Moy

    improper valve to cam lobe clearance?

    My engine has been ticking for a while now, and I've always known it was due to having improperly sized shims between the lash caps and cam lobes. I haven't been able to fix it, though, as the Supra is my one and only car, and daily driver. Recently, the sound has gotten a lot worse, but it's...
  6. Moy

    Polyurethane Shock Bushings?

    First off, I'm not sure if this belongs in General, or in the Suspension/Vehicle Dynamics section. (Mods, if you feel this would be better off in the Suspension section, please move this thread.) Now onto the questions. Does anyone make poly bushings for shocks? I've looked and could not...
  7. Moy

    Going to Minnesota for a week!

    Like the title says, I'm going to be up in Minnesota for about a week. Going up to the Mayo Clinic in Rochester. What all is there to do in that area? And also in the surrounding areas? I was thinking about maybe heading up to SupraSport one day, possibly Mall of America another. What...
  8. Moy

    Rare Exhaust?

    Hey all, I just recently purchased a catback exhaust from a friend, but have never heard of the brand. Specs on exhaust: 3", single outlet, looks EXACTLY the same as the stock exhaust system (aside from the single outlet). The name of the exhaust is "Pro F". It has a sticker with "pro f"...
  9. Moy

    What speedometer gear do I use with a R154 and 4.30 LSD?

    Alright folks, before you all tell me to search, I did look around and found this thread in particular quite useful: http://www.supramania.com/forums/showthread.php?t=61169&highlight=speedo+drive+gear Also read through this as well...
  10. Moy

    Chii Racing Culture 1st Official BBQ/Meet!

    Let's get a list going, post up for attendance!
  11. Moy

    Routing Clutch Hard Line

    Hello everyone. I'm about to do a 5 speed swap into my car, both because I had planned on doing it at some point, and as a solution to the problem I'm having with my auto. My question: does anyone have a picture of how the clutch hard line is supposed to be routed and/or how it sits on the...
  12. Moy

    Newbie Question... how do you replace the drive belts?

    I realize that this is one of those things that everyone should know how to do, but I'd like to know from people who have done it what the easiest and best ways to replace the belts are. What are the steps, what all has to be removed, etc.? I know that the fan, clutch, and probably fan shroud...
  13. Moy

    Dyno'd my car tonight... get ready to laugh

    Before I show you the sheet... Specs: 7M-GE Automatic 234,xxx miles slight valve tick slight valve cover leak exhaust leak Intake filter Dyno'd 128 rwhp and 137 rwtq (Sorry the image is so large, mods I can re-size if needed) Please tell me what the sheet is saying, I'm not sure what the...
  14. Moy

    Car died, now won't start. no power... please help

    Hey there everyone, I am in need of some help. (So you are aware of the conditions this all occurred in, it is currently raining outside.) Tonight, my car died on me on the way back from seeing the new FnF movie. I was sitting, stopped, at a railroad crossing, when first my CD stopped...
  15. Moy

    Supra spotted on Travel Channel

    I'm watching Anthony Bourdain's No Reservations, Sri Lanka right now. Bourdain and his guide were at a chopped Roti stand and when the camera panned out, there was a white 89+ turbo Supra parked at the same stand. Unfortunately I do not have an image of it. Just thought it was awesome and...
  16. Moy

    targa still leaking

    Like the title says, my targa is STILL leaking. I have absolutely no clue why though. It's only on the passenger side. I replaced it with a new one, and used a sealant between the drip rail and targa skin. I did the same on my driver side and have had no leaks what-so-ever. Does anyone have...
  17. Moy

    Best Sway Bars?

    I'm looking for some advice from the suspension expert(s). As I've found through this site, Tanabe, Suspension Techniques, and Whiteline are the big and/or only companies that make aftermarket anti-sway bars for the MK3. I do not know much of anything about a vehicle's suspension. I do...
  18. Moy

    N/A Powerband

    Hey all, I wanted to know where the powerband is on you're cars. My n/a is auto and bone stock, but it seems like it's powerband is in the higher rpms. I get great acceleration off of the line, but the RPM's fall off a little if I'm not WOT. Here's how it works for me: Say I'm at half throttle...
  19. Moy

    JIC lower arm bar

    I have a question about the product for anyone who knows. Would it help to eliminate the "wet noodle" effect from having the targa off while driving? I realize that it's meant to bolt to the subframes (separately) and should firm the handling, but is the product really worth it? Anyone who...
  20. Moy

    body dismantling

    Hey guys, I just have a quick question. In order to remove the fenders, would I have to remove the front bumper cover and nose panel? The reason why I ask is that the fenders, hood, and headlight covers don't line up properly. There are gaps everywhere and it looks like, well, shit. Thanks...