Search results

Hey guys, I did do a search but could'nt find anything relevant for some reason. Once again, I am having AFM issues, and I am seriously considering converting to at least the basic Maft translator. I've been on Maft's website and HP freaks, but need to know everything to get for the conversion...

Ok so got my new HG in and went to TSRM and printed out the steps for removal. Everything going OK up until I got to the cps. I have the bolts, and cover off, and naturally the cps spins left/right freely,...but I can't get it off. The instructions only say to "remove CPS sensor". So what am I...

OK I don't know if I have BHG or not, so here is my best description. My Supra loses coolant, although I dont know where from, can't see any visible leakage. When I add coolant back to the radiator, and then start the car, it smokes really bad..white in color. As the coolant gets low, the temp...

OK, I can't think of it, so help me out plz. It's the gasket that mates between the backside of the turbo & the downpipe. I have a BIC DDP if that helps, and its that gasket that mates it up to the turbo.

Well not hard to explain this one. I checked the battery and it shows 12.75 V..I turn the key, and nothing lights up...it's like I didnt turn the key at all. Once I did get a very dim dome light. PLZ help ! There is a turbo timer on the car, it has been fine and I have not touched any wiring...

I searched on the forum here with phrases like "walbro installation", and "fuel pump removal" with no luck. I even looked through the TSRM...90 something pages in that section. If it's there I missed it. I need help with changing my fuel pump and do I need to actually drop the fuel tank ? I know...

Well crap it's always something. It all started with me ordering a new Shift knob to replace my OEM that was starting to wear out. Quick swap right ? just unscrew the old and put on the new one ...WRONG ! I was'nt that lucky. While unscrewing the OEM, I noticed some wobble with the shaft, so I...

Help me out guys. I have a disconnected hose that goes right to the general area of a hard line that is plugged off. This hard line goes up to the intake manifold. Heres's a pic and I circled the problem out. The disconnected hose runs down and in front of the lower part of the cam cover, and...

Ok I DID try searching the forum, and google..my only results were for a MKIV. The panel I am hunting is the one under the hood between the headlights, or right above the oem intercooler. I need to find who has this! I even searched my favorite performance websites...currently google'ing it for...

Hey guys, tried looking on cygnus for the cylinder # order from front to firewall...all I found was 1-5-3-6-2-4. Is that front to firewall...or firewall to front ? I am changing my plugs and wires currently and need to know asap. Thanks.

Ok since I'm new to the 7m GTE im a little confused as to what's going on with my Supra. While driving around tonight with some friends, I noticed a couple things that just don't seem right as to other MKIII's I have driven and rode in. Mine is smoking bad under boost, and the car just does'nt...

Hey y'all I put some better pics up on my intro thread. Was gonna change the thread topic to say so but could'nt see where to do it. Nobody has looked since I put them up, so I thought I would clue y'all in because I know everyone at SM loves pics. :icon_bigg

OK the summary is my clutch pedal went to the floor with no tension. I managed to limp the car home and got it in the garage. First inspection revealed leakage right at the firewall. The master cylinder and lines all look good..so, I need some direction PLEASE !!

I need help figuring this out. The switch and buttons look fine for the power lumbar control, and I have checked to make sure the wire harness under the seat is pluggen in. I can't find a related fuse to these controls in the fuse block. None of them are labeled "seat" or anything. The weird...

I have searched all over the web, guess I am not good enough. I know how to program the controller, but I can't seem to find the wastegate spring pressure spec. Somebody help me out, I would like to get the correct spec programmed into the controller.

I thought I would share this... so that those of you that like hearing a 2Jz at full scream could get some brief amusement...LOL. This is a old video of my bro's ride. The exhaust is HKS Super dragger. It's me holding the cam and sorry the vid is kinda dark...

Hi everyone, my name is Chris and I from Louisiana. I am in the process of acquiring my 1st Supra, and its a 89' model with low mileage and a few mods. I wanted a stock car, but could not find one (not in decent shape anyway...). I will post up pics as soon as the car is in my driveway. I'm...