Search results

LOL Go to his house and eat his food!

You don't worry about that end. :) It's already wired and press the clutch in when you start the car. You just need to bypass the NSS!

Buy it from Harbor. BE VERY CAREFUL Rotating the motor. Go very slow and stand on the back legs or you'll be sorry!

What pedal switch? Do you want to wire in the Pedal switch? That is done in the car requires you to cut the starter signal coming from the key and wiring it inline to the switch at the bottom of the pedal. Just listen to me and jumper the Big White and Black Wires on the harness with 3...

^Wrong! The White wire on the Neutral safety switch needs to be looped it receives 12 volts from one end (white wire) and sends to the starter (via the black wire)

Okay. No you can't The wire going to the starter is Looped into the Auto Neutral Position sensor! The black wire there is the actual wire going to the starter. You're going to need to jump it there or cut your precious loom.

You CAN'T jump it in the car. (SEE NEXT POST) Look at the diagram. Now doing it this way. Cruise will not work. The switch at the top of the clutch pedal needs to be wired in line with B W.

darn, i came in here expecting the pics! <throws bottle of lotion at wall>

http://www.pepboys.com/sale_specials/coupons/10_off_merchandise_purchase_of_50_or_more/

I just had lunch.

I have one like that and hate it. Study but takes Much care to flip! I also have MK3Runners Engine stand in my garage and like it much more. http://www.northerntool.com/webapp/wcs/stores/servlet/product_6970_200305217_200305217 It looks like that. IIRR he bought it from Kragen or PepBoys.

As long as it's under 8.7:1 and you know what youu're doing you'll be fine.

Pics of Mother, EX-GF, Current GF, your neighbors, and your sister please.

^You overkilled it. :) No worries. Baboon is a chum of mine.

Buy a new panel from toyota; it'll match your bumper. ;)

Heres a long shot. Why don't you rejoin supraforums to get this 411 because all you have to do is plug in the rear speed sensor, bridge the neutral position sensor (2 gauge big wires), and figure out the two wires going to the reverse sensor? I don't know why theres a million quotes from SF on...

Wait a sec..... I'm highly confused here. Backing away slowly...............

Like this build. :) I got a 1 Piece Driveline FS. ;) /shameful plug.

"Limp Mode"? Any stored codes or check engine light on? look for code fiddy too.

I have a JDM 7M-GTE, Ash Tray, and Blue LHD Lock Bezel for the Driver side in a LHD Car.