Search results

Okay. I have a JDM r-154 that came with the 1jz swap. The guy I am doing this for brought me over a drive shaft today. The yoke WILL NOT fit into the spline on the transmission, it's to small. I think eh brought me a w58 one possible? Next. The Motor swap came with a cut drive shaft a a plug...

Touch up would look very nice for what you want to achieve. Scott your engine bay looks great.

It is done. I measured 3.2l. It is all done now shifter will be going back on. The good news is the 1JZ started today, idle was perfect, got to operating temperature perfect, and it also had great oil pressure. I will have to post some pic's, and video of the complete swap. I finally was able to...

Alright. Hi there everyone. I am just finishing up a swap for someone. I have a r-154 that needs fluid. I noticed the filler plug is a little out of reach and I don't have a nice little hand pump to pour the fluid into. I was wondering if I could remove the shifter and pour the fluid in from the...

I wonder if your ECU blew a cap..

A crank scrapper is used to get oil back to the sump faster, and also give more horse power because it is not continuing to keep the oil on rotating parts? That is what I always understood it to be.

Fansastic news. I have a list of cars that use the same serpentine belt as the 1jz. SUZUKI FORENZA 2004-2008 2.0L 2000CC 4CYL SUZUKI RENO 2005-2008 2.0L 1998CC 4CYL CHEVROLET S10 PICKUP 1998-2003 2.2L 2196CC 4CYL DAEWOO LEGANZA 1999-2002 2.2L 2200CC 4CYL DAEWOO NUBIRA 1999-2002 2.0L 2000CC...

Because 1JZ's are easier to work on in the engine bay duh? lol... On more serious note. The advancement in technology is well worth the swap alone. They're not prone to head gasket failures, and they have a fantastic oiling system. I don't like the oil pump drive shaft much on the 7M...

Thank you Mark, that will help me a lot. If anyone else actually has a car's serpentine belt they knows fits please let me know!

I found a great company. I paid $2300.00 shipped. 1jz-gte 2nd GEN, out of a jza70 Toyota Supra, came with r-154, Map sensor, ignitor, awesome fluid filled motor mounts, fuel lien uncut, harness perfect ECU no caps blown, even came with fuse box harness. (: I am doing this for a customer, but I...

By any chance.. would you have the 'Brand' of the belt :?

I blame your mom for making you rush. I would part it, and find a different Supra.

Someone... must know what car's serpentine belt fits the 1jz without A/C... I need one badly.

'89 b1 plug, this site will help you, there is a diagram of all the plugs. I have a few schematics I made myself as well.

Awesome Jay. That did indeed help. I will do that tonight, I am very close to completion. I hope I can find out what Serpentine belt fits the 1jz without A/C

I am looking for where some of you didn't have to extend your harness. I need to see where you cut a hole in the firewall and what is the best place. Any pictures would be great! I am not going to sue the stock location. People say they cut it near the pedals and run the ECU next tot he gas...

The ea2 1. Black - Yellow +12 v EFI unswitched 2. Black - Orange M-REL EFI main relay 3. light green OPT, water sensor in rad 4. Blue / Blue - Red A/C speed sensor 5. Black - Red +12v EFI switched 6. Black - Red To temp sensor in rad 7. Brown ACMG from ECU to clutch 8. Light Green - Red...

Great news guys. I am waiting for a few more parts I am basically all done though. I hooked up everything and the motor started without any issues tonight!!! Thought I would update this. I suck at build thread I tart one and end one with 1-2 posts >,<! Anyhow I am not out of the woods yet. I...

That two pin white connector does indeed go to the reverse lights on our cars.

... don't hit it there is a reason, either, pop off the c-clip on the clutch fork and pull the shaft that holds it out, or disconnect the pressure plate from the flywheel.