Search results

  1. JDMMA70

    35W HID Vs. 55W HID

    mine havent blew yet you just need to get a high quality kit and not the cheap chinese kits. Hella E-Codes are European Code Spec Headlamps, they work a lot better and even work well with HID because of its nice cut off off
  2. JDMMA70

    35W HID Vs. 55W HID

    im running 35w kit in e-codes an arizzle is right light out put is only a little bit better than good halogen bulbs. Heres a pic of my 8000K kit before i aimed them lower to show what they look like at stock height (i think mine were higher than stock but thats how i got the car *shrugs*). and...
  3. JDMMA70

    Who's car is runing right now

    Just pulled off the upper IM should have it running again tommorow first time its been down since August 08 not bad :)
  4. JDMMA70

    Bluechulappa's 89Turbo restoration

    Sside took them another head and it checked out ok no valves were leaking and when they measured it had never been machined and Bobby gave the ok saying he could take the minimum off and it would still keep the compression ratio around stock as he (Sside) was using a OEM HG. Bobby didnt like the...
  5. JDMMA70

    Bluechulappa's 89Turbo restoration

    thats been done already by a few of our members...
  6. JDMMA70

    Bluechulappa's 89Turbo restoration

    Here if you don't want to machine your head find a really straight head and buy a lapping plate and some lapping compound and go to town. Besides how is bobby going to know if your head is good or not if he doesn't check them that's like me bringing them my block and asking them to check if its...
  7. JDMMA70

    fender mirrors

    :runaway:
  8. JDMMA70

    fender mirrors

    Like this? I dont think they were an option at all but as you can see it doesnt stop people from putting them on.
  9. JDMMA70

    JZA70 R w/ RB26 DETT Engine

    Speaking from what ive been told from my buddies that on 32 and 33 GT-R's but youd be surprised the problems that plague (maybe apparent is a better word (with)) the RB26. They flat out said the JZ series is lightyears ahead of the RB. They looked at the bottom end of my motor and compared...
  10. JDMMA70

    Bluechulappa's 89Turbo restoration

    I wanna go fast! You ever thought of checking the deck for warpage yourself. Measure it and just ask can you remove the minimum and get the deck straight and clean for MHG?
  11. JDMMA70

    JZA70 R w/ RB26 DETT Engine

    I dunno in my head when i think about it, It would seem the turbocharger would get in the way of the steering shaft. Not to mention the very small ammount of space there is on the intake side of a LHD supra. Not saying it couldnt work, i mean there are RHD supras with JZ engine so im sure it...
  12. JDMMA70

    Tampa Fl here

    Welcome, and whats up is its January and its humid outside :(
  13. JDMMA70

    JZA70 R w/ RB26 DETT Engine

    Ive been waiting to see this done. Top Secret and their RB26 powered MK4 and now a MK3 however i feel this can only work in a MK3 if its RHD.
  14. JDMMA70

    Adjusting BOV

    Is there an adjustment screw on it?
  15. JDMMA70

    My 1991 Jay Blue Supra

    Sure can http://www.supras.com/06/techcenter/display.php?QID=5
  16. JDMMA70

    Bluechulappa's 89Turbo restoration

    Ahh so we looked at the pictures in the TSRM and compared now didn't we ? :sarcasm::icon_razz
  17. JDMMA70

    My 1991 Jay Blue Supra

    Def. Valve Seals my car use to do that too, it annoyed me.
  18. JDMMA70

    Tanabe Hyper vs touring medallion?

    Umm i hear the touring is quieter and that the Hyper is now discontinued. They look quite similar but i havent seen the Touring Medallion on any Supra yet. So most of us dont know. Heres mine if you want to hear. HKS DP, BIC Test Pipe, and Tanabe SHM
  19. JDMMA70

    Difference in Crank Pulleys Question

    I tried searching and could not find an answer to this question. I have two pulleys both came off of 7M-GTE's but they look quite different. I was wondering what the differences are and if there are any pros and cons to each of them if any at all. Thanks for your time again i hope...