Search results

If theres no crunching noises from the motor, and it just doesnt go up sometimes, then it could be a bent antenna rod or the gears in the motor are bad. Mine only went up half way. I got a new rod it fixed the problem.

If the nylon cord is still good and the motor isnt making any noises all you need is a new antenna rod. Thatll cost you $40 from Toyota and you can replace it in 15min.

New pics from Shimming, only the passenger side for now. Im going to try reshimming the inside on the mirror instead of the outside. The goal is to get the mirror further from the car. Before: After: Comparing to the stock mirror you can see there is a difference. However i do have...

Pop out the mirrors, all you need is a flat blade screw (wrapped in electrical tape) stick it underneath the mirror and pop it out. There are four screws holding the mirror motor onto the Pivot arm. I added washers underneath the mirror motor to angle it towards me more. Four total, two on each...

I just shimmed the mirror motor up a tad bit so it angles more towards my liking. Ill take pics tommorow.

For future refrence Martin, before i start looking to see how i can change the angle. Heres what it looks like . From the Passenger seat angled for RHD From passenger seat looking at driver mirror Leaning over from the passenger side From the drivers seat angles for LHD...

I vote Green for like Dark Green Mica i love that colour or any shade of Forest Metallic Green

Judging from the pics ive seen of JDM mirrors the glass is indeed the same as the Euro and Aus mirrors. you may be able to shim the actual mirror motor in the housing to angle it more towards the car so it can be adjusted properly i have tried it yet but will when i get some time. Im still...

I didnt find this info searching, so i thought id take the time to post this info in case anyone would like to know. First off it would seem the RHD and LHD Mirror Glass is exactly the same (Both Sides). Judging by the glass they are not (Flat and Convex like the US/Canada mirrors (reversed for...

thats a 20G turbo

Get a GT-R trunk lip spoiler from a BNR32 that would look HAWT

^ those test were done with a HKS 2 Layer Wet element, Im curious to how a 3 Layer Dry element does in a similar test. I know it may or may not be better but still curious.

Nice Nice and welcome, this thread needs pics. P.S. is there a giant alien space craft floating above your head? Just Kidding.

works 1jz and 7m ;) HKS Intake w/ 3 Layer Dry Element

+1 on the foglight mod now lets see that beam pattern on a wall since thats what counts :D

Wait so if my window is 3/4 of the way down it should rattle? ill have to try that, i never really noticed any rattle? Im assuming this happens while driving.

I've heard that Cibie lamps put out better lighting than Hella's do I've yet to see the beam pattern of one but I may just buy a set and see how they look

Here are some Clips from an old Japanese Crime Drama TV Show (弁護士・高林鮎子) where the main Lawer lady drives a Pre89 MA70 http://www.youtube.com/watch?v=xf68Ynl-3Os http://www.youtube.com/watch?v=tdpkkIuFzWQ

^ Sweden hmm its the FnF Supra

Techno/Trance seem to go really well with Supra videos. I like it