Search results

7M at 9000RPM? :ugh:

You should only run Toyota Red in a Toyota cooling system. Well, water freezes below 32F, so by the numbers, it could freeze in the block if you has straight water. I have never seen it but it doesn't mean it can't happen. OP had green coolant. I doubt that's why it cracked. Maybe it was...

Uh-oh 7M guys are going to eat you alive now! You Too!

Yes, JZ Coolant in the alternator is done by BMW. They have it on their 7 Series. We did a rebuild on one and had the alternator rebuilt while it was out as its a pain to pull in the car.

Are there any boost leak? Your problem is, you step on the pedal, car goes, you come off the pedal so the throttle body is completely closed and the car stalls? Are there any codes?

How are you controlling it? The little laptop looking unit?

Yes, look at the wiring diagram and you will see what I am talking about.

Go to the TSRM and follow the electrical diagram. Turn on the setting for heat and check the blower plug to see if there is power. If not, go and see if there is a signal going to the resistor as well.

See if you put the temperature on the highest setting if you get heat. Also, look at the lever on the heater valve, move it upward and see if you get heat. If you do, you either have no vacuum to the valve to operate the actuator or the actuator is bad itself.

Well you better hurry before I fly down there, buy it and put a JZ in it.

Complete rebuild kit from DM would help. Get the Toyota EGR valve gasket as it is a better quality one. You will have to modify the throttle body gasket, but its not hard to do at all, a razor blade would do.

Ofcourse, those two little munchkins are crazy. :p

*Golf Clap*

Nice. Only thing I don't like is the AFM setup, it's not where you placed it, it's just the AFM in general. Yes, I know the AFM is more accurate and users can post all the info of how much more accurate an AFM system is than a MAP based one but it would just look neater. Besides, tuning has...

Remember kids, street racing is illegal. ;) EDIT: Needed to pluralize. ;)

JZ parts are cheaper but keep in mind, a lot of import places are still short on motors, so the price might go up according. Supply and demand. One guy on this site said he's pay me 600 for the 1JZ I had listed as it came with everything but twins. -__- I wonder if it's against the rules to...

I just got an ideal.....I mean...I don't know, I think it was just raining over you. I like the lowballers, they make me laugh. One guy told me his FCON was worth more than my AEM and it was a deal I WAS GETTING, so I should trade with him. Now that was funny. <--Read my blog if you haven't.

I don't believe they line up correctly, so it would be to be ported to match each other. If there was enough interested, I'd start making the 7M FFIM again that I have pictured in my vendor section that keeps the alternator and compressor and I believe it looks quite nice!

I sent a text and waited a week, then called after I saw he didn't respond. I have spent a lot of money there and had a few defective parts along the way which Aaron took care of even though they were a year old BEFORE I started using them. One 7M Supra and two JZ Supras so just imagine the...