You can remove that shock. It was available on auto cars here in the states. Manual cars didn't have it.
Behind the hole on the manifold, is there a hole on the head to match? If so, then it is a USDM head and you will need to make up a block off plate for the exhaust side. If it doesn't...
1) Yes, they will work.
2) EGR valve. Is your motor USDM? JDM motors don't have EGR. JDM motor/USDM intake is fine.
3) Look at Dustin's Thread(Teal 92 Supra), He is using something similar.
4) You mean the serpentine belt tensioner? If so, yes. If you aren't running A/C or power...
Wouldn't you want to set it as close as possible to how you would if it was on the 7M since you are on 7M electronics? I would assume so. Just a theory.
RPM gauge is from an NA car? You need one from a turbo or do the resistor mod.
Oil pressure needs the 7M pressure sensor and the wire for the signal should be the yellow/black on the dash harness.
Temp gauge, what you should do it ground the single wire connector by the water neck. If the...
You cannot install the 2JZ-GTE ECU without doing a few things. You will need to change the oil pump to a GTE one or the later VVT-i oil pumps as those have the provision for the crank sensor, then modify the head for a cam sensor. It is not plug and play.
The 7M electronics is not that bad...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.