Search results

Who has ragged so far?

If you want a high quality factory wheels...these are the only factory wheels that I would use: Rays 2006 350z Track Edition wheels Track wheels are 18x9 front and 19x10 rear. +30 all the way around. Courtesy of Emission:

I believe they are 16x7.

Those are Mitsubishi Starion wheels They kinda look like MKII wheels.

You're correct on those calculations. Referencing a typical tire/wheel setup: 275/35/18, with a tire height of 25.58": A good size for the 20" would be 265/25/20, with a tire height of 25.22". Going back to the question of will a 10+35 fit? Without respect to the tire, yes.

I was thinking rears for both the 9.5 and 10.5. I also assumed that he was talking about two different sets of wheels. You're right, Tim, about the 9.5 not fitting 265s at the front. I'd go 235s on the 9.5+22. As for as my thoughts on the 10.5+22, I didn't consider this type of drop: My...

the 9.5s just needs a roll. and i would probably go with 265 tires. the 10.5s, you'll need to roll and flare the out the fender, then go with 275 tires.

Let's see couple pics of the wife and you.:naughty: I would start, but unfortunately, I don't get into relationships with my cars.

10 +35 will fit. You may not need to camber at all. Supra will look 4x4 on 20s. To pull off the 20" status , avoiding the 4x4 look, and get the 10" +35 in there effectively, the fender has to be rolled (maybe even flare them), get some 265 30 20 tires, then the car then needs to be fitted...

The QuickLIFT's purpose found at http://www.redlinetuning.com/products_quicklift.html "Our hood QuickLIFT systems are designed to lift and hold your hood without the need for the front-mounted prop rod. Simply start to raise your hood and our QuickLIFT system will take over mid-way to raise...

Sent you a reply with pics.

Thanks! Headlights are Hella 90mm modules: projector low beams w/HID and halogen high beams. I don't know what brand the cage is, bought it from a friend years ago; from my knowledge, it is discontinued. Good luck with your GT-Cs and 300ZX headlights projects!

I have a carbonfibrefx CF blockoff plate that I may sell. Send me a PM if you're interested. Thanks.

At first I thought that I wasn't cool enough to understand the jokes between Mike and you. I finally understood after reading your morning emergency thread. :icon_idea Right? I know you're young and in your peak days, but In the future, take it easy and pace yourself, Batman.:naughty: But...

:thumbsdow on the rims.

get them! Just roll and flare out the rear fenders

Not even close to fitting with a roll. The front will stick out over 2 inches. Rear will stick out over 3 inches. Widebody work will be needed for this.

8.5 is too narrow for the rear. If you don't wanna do a staggered setup, consider setups such as these. 5Zigen PRORACER GN+, 9.5 +38 all around. 5Zigen PRORACER ZR+520, 9.5 +37 all around 5Zigen FN01R-C, 9.5 +35 all around

If you guys wanna shop for decently priced, aggressive setups, my350z.com and g35drive.com are the place to be.

I have a feeling that guys like BorHor will be setting a trend on breaking that "conservative" mold.