Search results

  1. ians13

    new motor

    i hope so to :)
  2. ians13

    new motor

    payed for it yesturday got it today. it looks good pressure washed :), as the spark plug gally was full of water, but after taking off the valve cover it was spot less very clean toyota spark plugs wires timing belt the timing belt tensioner still has the original paint on it. i can read the...
  3. ians13

    new motor

    well it's going to be on the stock ct26 will i need fuel pump ,afc, fpr or will the stock fuel system handle this.
  4. ians13

    new motor

    well i got a new motor comming, going to put a metal HG in it should i get studs or bolts for the head. i read some were that studs make it hard to repair a blown HG with the motor in the car. also am thinking this motor i will want to run 12psi on it what kind of tunning will i need to...
  5. ians13

    How about Jacksonville peeps?

    yea it sux am working on getting a new motor well a used motor. but i want to get my car up and running good again.
  6. ians13

    A Sad Day

    well i think am going to try my luck with a jdm motor and put a MHG in while it' out of the car i can have the head and block preped for mhg, my only worry is taking it apart the motor with out hearing it run.
  7. ians13

    A Sad Day

    i guess i should look into how much it will cost for a rebuild before i buy a next motor.
  8. ians13

    A Sad Day

    well am a machanic and i can swap in this motor in 8hrs or less it's not that hard rwd cars are all to easy i don't want to fix the knock because it creates to much down time. i just need to know if there are any other places then ebay to buy a motor. plus the cost of a good rebuild would be...
  9. ians13

    A Sad Day

    lol you are all right i just want to get my car back working with as little down time as possible so that means i need a 7m been doing some redaing on the jdm 7m but seems like there lots of problems with jdm motors. then there are the people that have notting but good things to say. with my...
  10. ians13

    A Sad Day

    ok i am at a cross roads now rebuild the 7m but what of reliablity, depenability. am thinking about a 1j swap i would have to install it my self what parts are needed how hard is it to swap.
  11. ians13

    A Sad Day

    well my Hg was not that bad it ran fine no smoke so over hears just bad cold starts and i checked the oil no coolant. well what ever the reason it's put me in a bad mood.
  12. ians13

    A Sad Day

    Well Today the day before my car goes into the shop for HG repair, it develops a knock right at 2500rpm not very loud but you can hear it. am sure it's rod knock my oil is clean changed 300 miles ago castrol syntech 10/40 with lucus, how did this happen with i know my motor has over 167000 miles...
  13. ians13

    Really considering of moving on from supras,Sad day T_T

    Even New Cars gave problems, it's all part of ownership, i own 2 turbo cars plenty problems my 240 has rejected the new clutch i put so i had get a spec, still waiting to be put in , my supra has a worn head gasket that i have to take on this week end hopefully i can get it fixed for under a...
  14. ians13

    Major brain food for the (Blown Head Gasketeers)

    yea am starting my HG job this week end i was warned. it was going to blow and so i did
  15. ians13

    How about Jacksonville peeps?

    i will be starting my head job saturday.
  16. ians13

    Overheat

    tru am going to go with feltpro head gasket kit arp studs. and have the valves done as well. how hard is it to put a oil pump is this thing while it's down.
  17. ians13

    wheels

    yes the 240 is my baby/garage bitch does not get rained on sleeps indoors spends most of it time chilling in my garage. but it's plenty fun.
  18. ians13

    wheels

    well after a good drive i can say that it handles great lot less tire flop, i don't do any track driving so this is just based on street driving it's much better than stock.
  19. ians13

    wheels

    i have not driven it to much to day i'll have to get back to you on that.