Search results

You're on it now. Thanks

Finally got around to trimming the center console cover piece and Gorilla Glueing it down. I'm holding it down with duct tape (the actual stuff, not duck tape) so it adheres the way I want it to. I also cut out the base of the storage area in preparation of the switch panel mounting.

Got another 2 registrations added today, let's keep them coming

2 more registrations added, let's keep them coming folks :)

Don't forget, the registration cut-off is in 10 days

We'll find out in 12 days. Our estimates based on a similarly built car are over 500 RWHP on pump gas. You coming to the Supra Nationals?

Got the injectors replaced and my starter, but I was needing a new one anyways. The injectors fixed my stutter issue and I took it for a test drive this morning with no problems. I did make a new mounting bracket for the MAP sensor per Steve Ishii's recommendation. I'll be on the dyno on the...

Registrations #14 and 15 just added, are you next?

Registration list is updated, we have 15 cars registered so far

I took off my intake manifold and lower runner to replace the injectors today. Turns out I had assembled the injectors wrong and put the adaptor in the wrong spot. In the process of removing the last bolt from the intake manifold I accidently hit the starter with my wrench and fried it. I'll...

Yeah, I'm thinking about doing that, I do find myself needing a place for my cell phone/change while driving.I was thinking about covering the dash vent holes with fleece and resin (and possibly some sort of filler piece like wood and fiber resin to smooth out the transition) then covering it...

I relocated my hazzard switch and the rear window defroster (one of the few luxuries I still have) to the center console under the arm rest Matt.

I will e-mail the track manager and see what she says. I'm sure that if our event was affected by the construction I would have been informed but I will double check. Mark, hell yes!!! I sooo want to get on their road course and tear it up

I screw around online and watch stuff on Hulu

The seams are fairly smooth as I took an angle grinder with a flapper wheel to them and the edges are flush since I made it purposely too big. No other accessories will be added. All I want it to have is just the power port since I don't have heat, A/C, or a stereo anymore. As you see it now...

Gross how? The backside looks like shit because of all the holes that were covered and the Gorillia Glue that I used to glue the aluminum, but the backside won't be seen once it's installed. And remember, I will be having it covered in cloth (probably black pleather) so you won't see the...

K_Shan, keep in mind the aluminum plate is only a base and I will be having the piece covered in cloth. You know me Trevor, I'm OCD like no other

7 weeks away, have you registered yet?

7 weeks away, have you registered yet?

Got the front center console piece done. I trimmed the aluminum so it's nice and flush and installed the new power port. I just have to do a little re-wiring of the power port wiring to extend it and get rid of the 2 wires for the light ring and put it in.